Makita BHR241 Informazioni tecniche - Pagina 12

Sfoglia online o scarica il pdf Informazioni tecniche per Utensile elettrico Makita BHR241. Makita BHR241 14. Cordless combination hammer
Anche per Makita BHR241: Informazioni tecniche (14 pagine)

Stampa la pagina
Makita BHR241 Informazioni tecniche
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-9. F/R change lever, Wave washer, Cushion and Rubber pin 5 in Housing set
ASSEMBLING
Refer to Fig. 47.
Fig. 47
Fit the protrusion of Switch into Oval hole of F/R
change lever and assemble them to Housing L.
protrusion of
Switch
Housing set (L)
Battery housing set (L)
Assemble Cushion to Battery
housing set (L) at the rear side of
Terminal.as illustrated above.
oval hole of
F/R change
lever
Terminal
Pass Pin 1.5 through Rubber pin 5.
And then, assemble them to Battery
housing set (L) as illustrated right.
P 12/ 14
Wave washer 15
Do not forget to put Wave
washer 15 in place for
holding Ball bearing
607DDW on the commutator
end of Armature.
Pin 1.5
Rubber pin 5