Makita BJS101Z Informazioni tecniche - Pagina 5

Sfoglia online o scarica il pdf Informazioni tecniche per Utensile elettrico Makita BJS101Z. Makita BJS101Z 9. Cordless metal shears 1.0mm (20ga)

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-3. Helical gear 34, Ball bearings 627DDW, 6000ZZ, 696ZZ
DISASSEMBLING
1) Disassemble Shearing mechanism from Crank housing complete as illustrated in Figs. 2, 3.
2) Disassemble Center blade section as illustrated n Fig. 10.
Fig. 10
Shearing mechanism
3) Remove Ball bearings, Sealing screw and Helical gear 34 from Crank shaft. (Fig. 11)
Fig. 11
Remove three Ball bearings from Crank shaft
using 1R269.
Ball bearing
Ball bearing
627DDW
6000ZZ
Flat washer 7
Helical gear 34
ASSEMBLING
Assemble Helical gear 34, Sealing screw and Ball bearings to Crank shaft,
then assemble Link to Ball bearing 6000ZZ. (Fig. 12)
Fig. 12
Crank shaft
Helical
gear 34
Note:
Sealing screw is directional
when assembled to Crank shaft.
Be sure to face the side having
lower step towards Helical gear 34.
Sealing screw
Ball bearing
696ZZ
Sealing screw
Center blade section
Then remove Helical gear 34 and Sealing screw
using arbor press and 1R036.
Crank shaft
Sealing screw
Helical gear 34
1R036
Ball bearing
696ZZ
Ball bearing
6000ZZ
Flat
washer 7
Ball bearing
627DDW
Note:
Do not forget to assemble
Flat washer 7 between
Ball bearing 6000ZZ and
Ball bearing 627DDW.
Ball bearing 696ZZ
Helical gear 34
Ball bearing 6000ZZ
Ball bearing 627DDW
Link
P 5/ 9