Makita BTL063 Manuale di istruzioni - Pagina 8

Sfoglia online o scarica il pdf Manuale di istruzioni per Utensile elettrico Makita BTL063. Makita BTL063 20. Cordless angle impact wrench
Anche per Makita BTL063: Ripartizione delle parti (2 pagine), Opuscolo e specifiche (2 pagine), Specifiche tecniche (2 pagine), Manuale di istruzioni (12 pagine)

Stampa la pagina
Makita BTL063 Manuale di istruzioni
ENGLISH
1.
Red part
2.
Button
3.
Battery cartridge
4.
Switch lever
5.
Lamp
6.
Reversing switch lever
7.
Socket

SPECIFICATIONS

Capacities
No load speed (min
Impacts per minute
Max. fastening torque
Overall length
Rated voltage
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
............. Read instruction manual.
Intended use
The tool is intended for screw driving in wood, metal and
plastic.

SPECIFIC SAFETY RULES

DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to impact
wrench safety rules. If you use this tool unsafely or
incorrectly, you can suffer serious personal injury.
1. Hold power tools by insulated gripping surfaces
when performing an operation where the cutting
tool may contact hidden wiring or its own cord.
Contact with a "live" wire will make exposed metal
parts of the tool "live" and shock the operator.
2. Wear ear protectors.
3. Check the socket carefully for wear, cracks or
damage before installation.
4. Hold the tool firmly.
5. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
6. The proper fastening torque may differ depending
upon the kind or size of the bolt.
Check the torque with a torque wrench.
4
Explanation of general view
8.
Anvil
9.
Groove
10. Screw
11. Hook
12. Hex bolt
13. Angle head
14. Tooth
Model
Standard bolt
High tensile bolt
Square drive
-1
)
Net weight
BTL062
D.C. 14.4 V
SAVE THESE INSTRUCTIONS.
END004-2
WARNING:
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.
ENE033-1
IMPORTANT SAFETY
INSTRUCTIONS
FOR BATTERY CARTRIDGE
GEB009-3
1. Before using battery cartridge, read all
instructions and cautionary markings on (1)
battery charger, (2) battery, and (3) product using
battery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively shorter,
stop operating immediately. It may result in a risk
of overheating, possible burns and even an
explosion.
4. If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
5. Do not short the battery cartridge:
(1) Do not touch the terminals with any
conductive material.
(2) Avoid storing battery cartridge in a container
with other metal objects such as nails, coins,
etc.
(3) Do not expose battery cartridge to water or
rain. A battery short can cause a large current
flow, overheating, possible burns and even a
breakdown.
15. Straight head
16. Ratchet head
17. Standard bolt
18. Fastening torque
19. Proper fastening torque
20. Fastening time (S)
21. High tensile bolt
M4 - M12
M4 - M8
9.5 mm
0 - 2,000
0 - 3,000
60 N•m
387 mm
1.6 kg
BTL063
1.7 kg
D.C. 18 V
ENC007-2