Avanti WC493B Manuale di istruzioni - Pagina 4

Sfoglia online o scarica il pdf Manuale di istruzioni per Raffreddatore per vino Avanti WC493B. Avanti WC493B 18. Avanti wine chiller instruction manual

Stampa la pagina

Before the wine chiller is used, it must be properly positioned and installed as

described in this manual, so read the manual carefully. To reduce the risk of fire,

electrical shock or injury when using the wine chiller, follow basic precautions,

including the following:

• Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do

not use an extension cord

• Replace all panels before operating

• It is recommended that a separate circuit, serving only your wine chiller, be provided. Use

receptacles that cannot be turned off by a switch or pull chain

• Never clean wine chiller parts with flammable fluids. These fumes can create a fire hazard or

explosion. And do not store or use gasoline or other flammable vapors and liquids in the vicinity of

this or any other appliance. The fumes can create a fire hazard or explosion.

• Before proceeding with cleaning and maintenance operations, make sure the power line of the unit

is disconnected.

• Do not connect or disconnect the electric plug when your hands are wet

• Unplug the wine chiller or disconnect the power before cleaning or servicing. Failure to do so can

result in electrical shock or death.

• Do not attempt to repair or replace any part of your wine chiller unless it is specifically recommended

in this material. All other servicing should be referred to a qualified technician.

• Use two or more people to move and install the wine chiller. Failure to do so can result in back or

other injury.

• To ensure proper ventilation for your wine chiller, the front of the unit must be completely

unobstructed. Choose a well-ventilated area with temperatures above 55

(32

C). This unit must be installed in an area protected from the elements, such as wind, rain,

water spray or sunlight.

• The wine chiller should not be located next to ovens, grills or other sources of high heat.

• The wine chiller must be installed with all electrical, water and drain connections in accordance with

state and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in

accordance with the National Electrical Code and local codes and ordinances is required.

• Do not kink or pinch the power supply cord of the wine chiller.

• The fuse (or circuit breaker) size should be 15 amperes.

• It is important for the wine chiller to be leveled in order to work properly. You may need to make

several adjustments to level it.

• All installation must be in accordance with local plumbing code requirements.

• Make certain that the pipes are not pinched or kinked or damaged during installation.

• Check for leaks after connection.

• Never allow children to operate, play with or crawl inside the wine chiller

• Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners may damage

or discolor the interior.

• Do not use this apparatus for other than its intended purpose.

IMPORTANT SAFEGUARDS

F (13

C) and below 90