ALIBI ALI-NS2024R Manuale di installazione rapida - Pagina 3
Sfoglia online o scarica il pdf Manuale di installazione rapida per Fotocamera digitale ALIBI ALI-NS2024R. ALIBI ALI-NS2024R 6. 4mp ip low light turret camera
Stampa la pagina
2.
In the popup window, edit the current network parameters, and then enter the admin user
password in the field at the bottom.
Enable DHCP: You can select Enable DHCP to acquire compatible network settings from
a.
a DHCP server installed on the LAN. However, these settings can be changed by the DHCP
server. Since it is recommended to use an unchanging IP address, you can use DHCP to acquire
compatible network settings, and then uncheck Enable DHCP and save that configuration to
retain the new network parameters.
b.
In the example below, the IPv4 address was changed to 192.168.3.100, and the IPv4 Gateway
was changed to 192.168.3.1. The Subnet Mask here did not need to change. These settings
were determined to be compatible with the network router and other devices that share the
same router.
Click OK to save your settings. The parameter change(s) will be shown device's network parameters
3.
(see below).
Step 5.
Login to the camera
NOTE: If the camera LAN extension cable is attached to a Network Video Recorder (NVR), skip this step.
Microsoft® IE is used to access your camera remotely. IE must run as an Administrator to use all features
available through a remote login to the camera.
Setting MS Internet Explorer to run as an Administrator
Window 7: To run IE as an Administrator:
1.
Find or create an IE icon on your computer desktop.
2.
Hold down the shift key, and then right-click on the IE icon.
www.observint.com
3
Modify Network Parameters
MS Internet
Explorer icon
3.
Click Run as administrator in the pop-up menu.
Window 10: To run IE as an Administrator:
Find MS IE in the start menu. Usually this is found in the Windows Accessories group.
1.
2.
Pin the entry to Start.
3.
Right click on the Internet Explorer tile, and then select More | Run as administrator.
To login to the camera from a computer on the same LAN:
1.
Open your Microsoft Internet Explorer (IE) browser on your computer and enter the IP address of the
camera in the URL field. In the example below, the IP address of the camera is 192.168.3.100.
In the login window, enter admin for the User Name and the password you created in the
2.
Password field, the click Login.
3.
If this is the first time you are logging into a camera, you may see the message in the following
screen. If this appears, follow the sub-steps below.
Run as administrator
Run as
administrator
© 2018 Observint Technologies. All rights reserved.