Makita DA4031 Manuale di istruzioni - Pagina 3
Sfoglia online o scarica il pdf Manuale di istruzioni per Utensile elettrico Makita DA4031. Makita DA4031 13. Angle drill
Anche per Makita DA4031: Ripartizione delle parti (3 pagine), Manuale di istruzioni (17 pagine), Ripartizione delle parti (3 pagine), Manuale di istruzioni (8 pagine), Manuale di istruzioni (10 pagine)
Stampa la pagina
11.
Avoid accidental starting. Be sure switch is off before plugging
in.
Carrying
tools w i t h your finger on the switch or plugging in tools that have the switch
on invites accidents.
12.
Remove adjusting keys or wrenches before turning the tool on. A wrench
or a key that is left attached t o a rotating part
of
the tool may result in personal
i nj u r y.
13.
Do not overreach. Keep proper footing and balance at all times. Proper footing
and balance enables better control of the tool in unexpected situations.
14. Use safety equipment. Always wear eye protection. Dust mask, non-skid
safety shoes, hard hat, or hearing protection must be used for appropriate
conditions.
Tool Use and Care
15.
Use clamps or other practical way t o secure and support the workpiece
to
a stable platform. Holding the work by hand or against your body is unstable
and may lead t o loss of control.
16. Do not force tool. Use the correct tool for your application. The correct tool
will do the job better and safer at the rate for which it is designed.
17.
Do
not use tool i f switch does not turn
it
on or off. Any tool that cannot
be controlled with the switch is dangerous and must be repaired.
18. Disconnect the plug from the power source before making any adjustments,
changing accessories, or storing the tool. Such preventive safety measures
reduce the risk of starting the tool accidentally.
19. Store idle tools out of reach of children and other untrained persons. Tools
are dangerous in the hands of untrained users.
20. Maintain tools w i t h care. Keep cutting tools sharp and clean. Properly
maintained tools, with sharp cutting edges are less likely t o
bind
and are easier
to control.
21. Check for misalignment or binding of moving parts, breakage of parts, and
any other condition that may affect the tools operation. I f damaged, have
the tool serviced before using. Many accidents are caused by poorly
maintained tools.
22.
Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one tool, may become hazardous
when used on another tool.
SERVICE
23.
Tool service must
be performed only by qualified repair personnel. Service
or maintenance performed by unqualified personnel could result
in
a risk of
injury.
24. When servicing a tool, use only identical replacement parts. Follow
instructions in the Maintenance section of this manual. Use of unauthorized
parts or failure t o follow Maintenance Instructions may create a risk of electric
shock or injury.
3