Gardebruk DBLL001 Manuale - Pagina 7

Sfoglia online o scarica il pdf Manuale per Soffiante Gardebruk DBLL001. Gardebruk DBLL001 15.

Stampa la pagina

To start the Vacuum-Blower ensure that the

intermediate suc�on/blower tube is ﬁ�ed

correctly.

WARNING! B

efore selec�ng the suc�on or

blower func�on, ensure that the func�on

selector lever is working properly and that it is

not aﬀected by dirt from previous use. Select

either the suc�on or blower func�on with the

selector lever on the side of the machine (7)

and press the bu�on (3). If more power is

needed, move the speed controller from

posi�on "1" to posi�on "6" (Fig. 10).

Stopping the Vacuum-Blower

To turn oﬀ the machine you can simply release

the switch.

Before star�ng the applica�on, make sure that

the waste bag is ﬁ�ed and the shoulder strap is

adjusted to a suitable working posi�on.

Double insulation

The leaf blower has double insula�on. This

means that all external metal parts are insulat-

ed from the electrical supply.

This is achieved by introducing an insula�on

layer between electrical and mechanical parts.

The double insula�on guarantees you the

greatest possible safety.

Blowing (Fig. 7 and 8a)

Blow mode can be also used to clean corners,

fences, walls, wooden areas or beneath cars. Be

careful how you point the jet of air as it could

move heavy material and cause injury or

damage.

●Turn the Func�on switch an�clockwise to

posi�on " ↑ "

●Turn the switch to on, point the jet of air in

front of you and move forward slowly to

gather together the leaves or to move the

leaves from inaccessible areas.

Vacuum mode (Fig.7 and 8b)

●Set the Func�on switch clockwise to posi�on

"↓". Make sure that the waste bag is ﬁ�ed

properly.

www.DeubaXXL.de

●Hold the pipe several cen�meters over the

leaves that you are going to suck up. Now

switch the applica�on on.

●Hold the applica�on as shown in Fig. 8b and

8c, �l�ng the Blower/Suc�on pipe slightly, and

use a sweeping ac�on to collect light debris

with a few inches distance between the

opening of Blower/Suc�on pipe and the ﬂoor or

ground to be clean up.

●The leaves will be sucked up into the pipe,

chopped up and thrown into the waste bag.

Tips: Light dirty between the suc�on pipe,

motor housing and exhaust opening can be

moved by changing of the posi�on of the

Func�on switch from "↑" to "↓"

or likely

several �mes.

CAUTION!

Always switch oﬀ the applica�on and pull the

plug out of the power socket, wait �ll the

applica�on stands�ll completely before

carrying out any work on

●Take care of your applica�on and clean it

regularly to obtain long-las�ng eﬃciency and

performance.

●When you have ﬁnished work, remove the

waste bag, turn it upside down and clean it

thoroughly.

●Keep the air vents clean and free from grass.

●Use only a warm damp cloth and a so� brush

to clean your applica�on.

●Never wet or spray water on the applica�on.

●Do not use detergents or solvents as these

could cause irreparable damage to your

applica�on. Chemicals can easily destroy the

plas�c parts.

●If vacuum power decreases and the bag is

empty, clean the shredding chamber carefully.

Troubleshooting

WARNING! B

efore any maintenance work, ﬁrst

unplug the applica�on from the mains.

●Applica�on does not start. Check the electri-

cal connec�on and the posi�on of the switch

should be set on "1".

●The blower func�on does not work. Check the

Func�on switch is set in the right posi�on.

●The suc�on func�on does not work. Check

that the Func�on switch is set in the right

posi�on. Remove any dirty from suc�on pipe

and empty the waste bag.

●The shredder wheel is blocked. Remove the

leaves that have been sucked up and empty the

waste bag. Check that if both internal and

external openings are clear. Remove any dirt

from the opening by using a wooden s�ck. A

piece of wood or stone, plas�c bag may result

damage of the shredder wheel. Should this

persist, contact the authorized service center

immediately.