Garden Gear M1E-LD-115 Manuale di istruzioni - Pagina 5
Sfoglia online o scarica il pdf Manuale di istruzioni per Utensile elettrico Garden Gear M1E-LD-115. Garden Gear M1E-LD-115 18. Hedge and edge trimming shears
Stampa la pagina
Electrical Safety
Make sure the power rating on the plug matches the outlet.
•
Never modify the plug in any way.
•
Do not use any adaptor plugs with earthed (grounded) power tools.
•
Unmodified plugs and matching outlets will reduce risk of electric shock.
To prevent the risk of electric shock, when operating the tool avoid body
•
contact with earthed or grounded surfaces, such as pipes, radiators,
ranges, refrigerators and never operate the tool in the rain. You must also
never expose the tool to moisture.
Never use the power cable for carrying, pulling or unplugging the power
•
tool.
Damaged or entangled cables can increase the risk of electric shock, for
•
this reason; keep the power cable away from heat, oil, sharp edges or
moving parts.
Personal safety
• Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired or
under the influence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in serious personal
injury.
• The operation of any power tool can result in foreign objects being thrown
into your eyes, which can result in severe eye damage. Before beginning
tool operation, always wear safety goggles or safety glasses with side
shields and a full-face shield when needed. We recommend the use of a
Wide Vision Safety Mask for use over glasses, or standard glasses with
side shields. Always wear eye protection, which conforms to ANSI Z87.1.
To prevent the risk of injury, you must also wear non-slip safety shoes,
hardhat, earmuffs and dust mask when required.
• Do not wear loose clothing or jewellery when operating the tool, as they
could become caught in the moving parts. If you have long hair keep it tied
back above shoulder height.
To prevent unintentional starting of the tool, ensure the safety switch is in
•
the off-position before connecting it to the mains power supply, or when
picking up or carrying the tool. Never carry the power tool with your finger
on the power trigger.
5