Corsa 14247 Istruzioni per l'installazione - Pagina 4
Sfoglia online o scarica il pdf Istruzioni per l'installazione per Cappa di ventilazione Corsa 14247. Corsa 14247 4. Cat-back exhaust system for chevrolet avalanche 2007; chevrolet avalanche 2008; chevrolet suburban 2007; chevrolet suburban 2008; gmc yukon xl 2008; gmc yukon xl 2007; chevrolet tahoe 2007; chevrolet tahoe 2008; gmt900 2008; gmt900 2007
Stampa la paginaFIG. S
4) Replace the heat shield using a 15mm socket and ratchet.
5) Slide a 3" TORCA clamp over the tip assembly and place the tip onto the end of the tailpipe.
Pre-tighten the clamp at this time. (See Fig's V, W, X, Y & Z)
6) Starting from the front of the CORSA exhaust system tighten all TORCA
clamps to
45 ft-lbs
7) Replace the spare tire and its components to the pre-removal condition.
8) It is strongly suggested that all clamps be checked and
tightened after road testing the vehicle once the system has cooled.
FIG. W
NOTE:
During cold weather start-ups, you may experience an exhaust
sound that is deeper and louder in tone than usual. This is temporary
and will diminish to normal levels once your engine has reached its
normal operating temperature.
NOTE:
Immediately following the installation of your CORSA exhaust
system, you may experience a trace of smoke after initial start-up.
DO NOT be alarmed. The smoke is caused by the burning of a small
amount of forming oil residue used in the manufacturing process.
CORSA PERFORMANCE EXHAUST
FIG. T
using a torque wrench.
FIG. X
Exhaust System Installation: Cat-Back Exhaust System
2007-08 Avalanche/Suburban/Yukon XL 5.3L GMT900
Single Side Exit
Twin Pro-Series 4.0" Tips / SPORT PN 14246 / TOURING PN 14247
Hydroformed Oval Tip / SPORT PN 14248 / TOURING PN 14249
FIG. Y
FIG. U
FIG. V
FIG. Z
EXHAUST SYSTEMS