HIKVISION HiLook Series Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per DVR HIKVISION HiLook Series. HIKVISION HiLook Series 13. Smart hybrid light bullet & turret camera
Anche per HIKVISION HiLook Series: Manuale di avvio rapido (18 pagine), Manuale d'uso (18 pagine), Manuale d'uso (14 pagine), Manuale d'uso (20 pagine), Manuale d'uso (18 pagine), Manuale d'uso (17 pagine)

Stampa la pagina
HIKVISION HiLook Series Manuale d'uso
2). Loosen screw A to adjust the tilt position [0° to
180°].
3). Loosen screw B to adjust the rotation position [0°
to 360°].
7. Tighten the trim ring and screws to finish the
installation.
2.1.2 Ceiling/Wall Mounting with Junction Box
Before you start:
You need to purchase a junction box in advance.
Ceiling mounting and wall mounting are similar.
Following steps take wall mounting as an example.
Steps:
1. Paste the drill template for junction box to the place
where you want to install the camera.
(Optional) For cement wall, drill the screw holes
2.
with a 5.5 mm drill and insert the supplied wall
plugs.
Figure 2-4 Drill Template for Junction Box
3. (Optional) Drill the cable hole, when the cables are
routed through the wall.
Take apart the junction box.
4.
Align the screw holes of the camera with those on
5.
the junction box cover. Attach the camera to the
junction box cover with three PM4 × 10 screws.
Figure 2-5 Attach the Camera to the Junction Box Cover
Secure the junction box body on the wall with three
6.
PA4 × 25 screws (supplied).
Figure 2-6 Secure the Junction Box on the Wall
Route the cables through the bottom cable hole or
7.
side cable hole of the junction box and connect the
cables.
Fix the junction box cover on its body with three
8.
PM3 × 16 L6 screws that come with the junction
box.