Lexmark 28S0500 - E 340 B/W Laser Printer Riferimento rapido - Pagina 2
Sfoglia online o scarica il pdf Riferimento rapido per Stampante Lexmark 28S0500 - E 340 B/W Laser Printer. Lexmark 28S0500 - E 340 B/W Laser Printer 2. Lexmark e340: install guide
Anche per Lexmark 28S0500 - E 340 B/W Laser Printer: Impostazione (2 pagine)
Stampa la pagina
Printing on specialty media
Clearing paper jams
Follow these instructions to print on media such as transparencies,
When a paper jam occurs, the printer stops and the operator panel
card stock, labels, or envelopes. The type of print media you want to
Paper Jam message comes on. Clear the paper jam and press GO to
use determines which tray or feeder it should be fed from.
continue printing. We recommend that you clear the entire paper path
when a paper jam occurs.
1
Load the print media as specified for the tray you are using. See
Loading paper or other print media
for help.
To clear a paper jam:
2
From the computer software application, set the paper type, size,
1
If you are feeding paper from a tray, remove the tray, and then
and source according to the media you loaded.
remove any jams.
a
From the computer software application, select File
Print.
2
Open the front cover, and remove the print cartridge assembly.
b
Click Properties (or Options, Printer, or Setup, depending on
the application) to view the printer driver settings.
c
Click the Paper tab.
d
Select your media type (transparencies, envelopes, and so
on) from the Form Type list box.
e
Select the tray or feeder containing the specialty media from
the Form Source list box.
f
Select the size of the specialty media from the Form Size list
box.
g
Click OK, and then send your print job as usual.
3
Remove any jams in the area behind the print cartridge
assembly.
© 2005 Lexmark International, Inc., All rights reserved.
P/N 28S1837
*28S1837*
Printed in China
E.C. 28S013
6/05
Operator panel
4
Lift the flap at the front of the printer, and remove any jams
beneath the flap.
Canceling a print job
If the job you want to cancel is printing, and Busy appears on the
display:
1
Press Menu until you see Job Menu, and then press Select.
2
Press Menu until you see Cancel Job, and then press Select.
Printing a menu settings page
1
Make sure the printer is on and the Ready message appears.
2
Press and release Menu until you see Utilities Menu, and then
press Select.
5
Open the rear exit, and remove any jams.
3
Press and release Menu until you see Print Menus, and then
press Select.
6
After you have cleared the jams, reinstall the print cartridge
assembly, make sure all printer covers and trays are closed, and
then press GO to resume printing.
If you need more information
•
See the publications CD that came with your printer for helpful
information about using and maintaining your printer.
•
Contact your administrator or Help desk if you have questions
about network printing.
Common operator panel messages
For a more detailed list of operator panel messages, see the
publications CD.
Message
Actions
Load Manual
• Load the multipurpose feeder with the print
media specified on the second line of the
The printer is ready for
display.
print media to be
inserted into the
• Press
Select
or
Go
to ignore the manual
multipurpose feeder.
feed request and print on print media
already installed in one of the trays.
• Cancel the current job.
• Press
Go
to print the contents of the buffer.
Waiting
The printer has received
• Cancel the current job.
data to print but is
waiting for a command or
additional data.
Not Ready
Press
Go
to ready the printer to receive jobs.
The printer is not ready
to process data.
Flushing Buffer
• Wait for the message to clear.
The printer is discarding
• Sometimes this message means the driver
the current print job.
data did not match what the printer was
expecting. If the situation recurs, try
printing from another printer driver.