Avantree BTTC-418 Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per Trasmettitore Avantree BTTC-418. Avantree BTTC-418 9. Bluetooth transmitter

USB

AUX

OPT

SBC

APTX

Clear paired history

After power on, press and hold BOTH A and B together for 7 seconds, both

seconds, then A enter pairing mode automatically,

1. Not working/ no sound.

1.1. No audio signal into the Audikast

If connected using OPTICAL port,

• Ensure your TV audio format is set to "PCM", since the Audikast does not decode Dolby/DTS.

Otherwise, you will need to get one Digital to Analog Converter that supports Dolby/DTS. ;

• Change your TV audio OUT setting to "External Speakers".

If connected using the RCA ports,

• Ensure use the Red/White ports labeled "AUDIO OUT". Other RCA ports are usually AUDIO IN

and incorrect;

• Change your TV audio OUT setting to "External Speakers".

If connected using AUX/3.5mm audio out,

Change your TV audio OUT setting to "Headset", and can you hear any sound with the wired

headphone plugged directly into the TV?

1.2. The Audikast and headphones are not connected properly

Re-pair and connect them strictly following Point 2, once connected successfully,

B turn SOLID BLUE.

2. Short range / audio cuts

Unstable Bluetooth connection - Clear paired history of BOTH Audikast and headphones. Blue

tooth

signal interference - Turn o all other nearby Bluetooth enabled devices.

turn SOLID

BLUE

RED

close to A ashes

BLUE

will be on

for 2

BLUE

and

alternately.

close to A /