GARDEN OF EDEN 11222 Manuale d'uso - Pagina 2

Sfoglia online o scarica il pdf Manuale d'uso per Timer GARDEN OF EDEN 11222. GARDEN OF EDEN 11222 13. Water timer - battery operated

CONTROL BUTTONS

1. Set local time

2. Set the start time for irrigation

3. Watering frequency setting (days)

4. Set the length of the watering time

5. Value increase / decrease buttons

6. Accept setting

7. Skip

Press the button to wake up the display.

Press and hold for a few seconds to start or stop manual watering

Remark: Maximum operating pressure: 80 PSI for watering only.

Place the inlet on a faucet and then turn it clockwise, strictly by hand only.

Place a sprinkler tube on the output connector using the quick coupler.

Inlet connection: ¾ thread with filter, adapter, rubber seal.

Output connector: ¾ thread with quick connector.

SET CURRENT DAY AND TIME

Set local time: press the "Set clock" button, then the +/- button to set the

clock, press the skip button (7) to go to the minute and use the +/- buttons

to set the minute, then press the skip button again (7) to set the current

day. When you have finished setting, save by pressing the „OK" button.

TIMER WATERING ON / OFF

Enter the programming menu by pressing the „Program" button, then

press the button again and again to select the program location you

want to program (P1-P2-P3). You can switch the irrigation stored in the

respective program location on / off by pressing the skip button (7). Press

OK to save the setting.

SET WATERING TIMING

Use the „Program" button to select the program location you want to

program, then press the „Start time" button (2). Use the +/- buttons to

set the watering time, first the hour and then the minute. You can switch

between the hour and the minute using the scroll key (7). Save the setting

by pressing the „OK" button.