Lexmark 654dn - T B/W Laser Printer Manuale di risoluzione dei problemi - Pagina 5
Sfoglia online o scarica il pdf Manuale di risoluzione dei problemi per Stampante Lexmark 654dn - T B/W Laser Printer. Lexmark 654dn - T B/W Laser Printer 10. Envelope feeder installation sheet
Anche per Lexmark 654dn - T B/W Laser Printer: Configurazione e installazione (2 pagine), Scheda di installazione (1 pagine)
Stampa la pagina
4
Press the down arrow button until
Prt Quality Pgs
appears, and then press
.
The pages are formatted, Printing Quality Test
Pages appears, and then the pages print. The message
remains on the printer control panel display until all the pages
print.
5
After the print quality test pages print, press the down arrow
button until
Exit Config Menu appears, and then
press
.
The information in the following topics may help you solve print
quality problems. If these suggestions still do not correct the
problem, then call for service. You may have a printer part that
requires adjustment or replacement.
Blank pages
These are possible solutions. Try one or more of the following:
P
ACKING MATERIAL MAY BE ON THE PRINT CARTRIDGE
Remove the print cartridge and make sure the packing material
is properly removed. Reinstall the print cartridge.
T
HE TONER MAY BE LOW
When 88 Cartridge low appears, order a new print
cartridge.
If the problem continues, the printer may need to be serviced.
For more information, contact Customer Support.
Clipped images
These are possible solutions. Try one or more of the following:
C
HECK THE GUIDES
Move the width and length guides in the tray to the correct
positions for the paper size loaded.
C
HECK THE PAPER SIZE SETTING
Make sure the paper size setting matches the paper loaded in
the tray:
1
From the printer control panel, check the Paper Size setting
from the Paper menu.
2
Before sending the job to print, specify the correct size
setting:
•
For Windows users, specify the size from Print
Properties.
•
For Macintosh users, specify the size from the Page
Setup dialog.
Ghost images
C
HECK THE PAPER TYPE SETTING
Make sure the paper type setting matches the paper loaded in
the tray:
1
From the printer control panel, check the Paper Type setting
from the Paper menu.
2
Before sending the job to print, specify the correct type
setting:
5
•
For Windows users, specify the type from Print
Properties.
•
For Macintosh users, specify the type from the Print
dialog.
Gray background
C
T
D
HECK THE
ONER
ARKNESS SETTING
Select a lighter Toner Darkness setting:
•
From the printer control panel, change the setting from the
Quality menu.
•
For Windows users, change the setting from Print
Properties.
•
For Macintosh users, change the setting from the Print
dialog.
Incorrect margins
These are possible solutions. Try one or more of the following:
C
HECK THE PAPER GUIDES
Move the guides in the tray to the correct positions for the
paper size loaded.