Avatoast 184T140 Manuale d'uso - Pagina 6
Sfoglia online o scarica il pdf Manuale d'uso per Tostapane Avatoast 184T140. Avatoast 184T140 9. Adjustable speed conveyor toaster
Stampa la pagina
BEFORE USING YOUR TOASTER
Before cooking anything in your oven for the first time, please follow these simple instructions:
1 .
This conveyor toaster has been designed to continuously produce toasted bread or buns .
The desired toasted color of the product can be adjusted by changing the belt speed of the
conveyor . Depending on installation position, the toasted product can be discharged to the
front or rear of the unit .
2 .
Ensure the support feet are assembled to the unit before commencing operation .
3 .
Thoroughly clean as described in the cleaning section of this manual (page 6) .
4 .
For best results, allow the unit to preheat for 20-25 minutes before use so that the correct
operating temperature can be reached .
USING YOUR TOASTER
184T140
The unit has two controls .
1.
Speed/color control
Determines the length of time the toast or product is in the heating chamber .
The slower the speed, the longer the exposure and the darker the product .
2.
Heat control switch has 4 settings.
"OFF" - In this position, the unit is off .
"STANDBY" - In this position, the conveyor belt will run and both top and bottom
elements will operate at 25% capacity . This mode is designed to keep the unit warm in
quiet periods to reduce start-up time and conserve energy .
"BREAD" - In this position, both top and bottom elements operate at full capacity .
This is the ideal mode for toasting bread .
"BUNS" - In this position, only the top element operates at full capacity .
This is the ideal setting for toasting one side only of a bun .
184T3300B • 184T3300D • 184T3600B • 184T3600D
These units have three controls .
1.
Speed/color control
Determines the length of time the toast or product is in the heating chamber .
The slower the speed, the longer the exposure and the darker the product .
The top and bottom heating elements are independently controlled .
2.
Heat Control Top Element is infinitely adjustable.
"0" is the off position . "6" is the hottest setting . "1" is the lowest setting .
3.
Heat Control Bottom Element is infinitely adjustable.
"0" is the off position . "6" is the hottest setting . "1" is the lowest setting .
As described above, product appearance or color is dependent on conveyor speed and type
of product . These other factors may also affect the toasting color:
i . Moisture content of the product .
ii . Sugar content of the product .
iii . Initial product temperature .
5.