Makita HM1801 Manuale di istruzioni - Pagina 2

Sfoglia online o scarica il pdf Manuale di istruzioni per Utensile elettrico Makita HM1801. Makita HM1801 12. Electric breaker
Anche per Makita HM1801: Manuale di istruzioni (10 pagine), Manuale di istruzioni (8 pagine), Manuale di istruzioni (20 pagine), Manuale di istruzioni (8 pagine), Manuale di istruzioni (12 pagine), Informazioni tecniche (18 pagine)

Stampa la pagina
Makita HM1801 Manuale di istruzioni
ENGLISH

SPECIFICATIONS

Blows per minute
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
DOUBLE INSULATION
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for heavy chiselling and demolition
work as well as for driving and compacting with
appropriate accessories.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
For public low-voltage distribution systems of
between 220 V and 250 V.
Switching operations of electric apparatus cause voltage
fluctuations. The operation of this device under
unfavorable mains conditions can have adverse effects
to the operation of other equipment. With a mains
impedance equal or less than 0.31 Ohms it can be
presumed that there will be no negative effects. The
mains socket used for this device must be protected with
Model
Overall length
Net weight
Safety class
equipment
and
environmentally
compatible
HM1801
1,100
824 mm
29.7 kg
END201-5
a fuse or protective circuit breaker having slow tripping
characteristics.
For Model HM1801
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 2.30 dB(A)
its
Vibration
The
vibration
determined according to EN60745:
Work mode : chiseling function
Vibration emission (a
Uncertainty (K) : 1.5 m/s
ENE046-1
For Model HM1810
Noise
The typical A-weighted noise level determined according
ENF002-1
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 2.52 dB(A)
Vibration
The
vibration
ENF100-1
determined according to EN60745:
Work mode : chiseling function
Vibration emission (a
Uncertainty (K) : 1.5 m/s
2
HM1810
1,100
824 mm
32.3 kg
/II
) : 84 dB(A)
pA
) : 104 dB(A)
WA
Wear ear protection
total
value
(tri-axial
) : 14.0 m/s
h,CHeq
2
) : 84 dB(A)
pA
) : 104 dB(A)
WA
Wear ear protection
total
value
(tri-axial
2
) : 9 m/s
h,CHeq
2
ENG102-3
ENG215-2
vector
sum)
2
ENG102-3
ENG215-2
vector
sum)