Jandy Infinite WaterColors IWC15W100 Manuale d'uso - Pagina 16
Sfoglia online o scarica il pdf Manuale d'uso per Controllore Jandy Infinite WaterColors IWC15W100. Jandy Infinite WaterColors IWC15W100 16. Nicheless led light
Anche per Jandy Infinite WaterColors IWC15W100: Manuale di installazione e funzionamento (12 pagine), Manuale (2 pagine)
Stampa la pagina
Problem
Lights don't turn on
One or more lights are
dim, blinking or not
working
Lights are flashing
yellow
Different colors from
different lights
Zodiac Pool Systems LLC
2882 Whiptail Loop # 100, Carlsbad, CA 92010
1.800.822.7933 | Jandy.com
Zodiac Pool Systems Canada, Inc.
3365 Mainway, Unit 2
Burlington, ON L7M 1A6
1.888.647.4004 | Jandy.ca
©2021 Zodiac Pool Systems LLC. All rights reserved.
ZODIAC
is a registered trademark of Zodiac International, S.A.S.U.used under license.
®
All other trademarks are the property of their respective owners.
H0667000_REVD
Possible Cause
Lights are not
powered
Poor connection or
improper wire gauge
Lights are not
communicating with
the Infinite
WaterColors LED
Light Controller or
lights are connected
to a non-compatible
controller or
transformer.
Zones are set
differently
Corrective Action
Check the 120VAC power
supply into the transformer,
14VAC output at the
transformer, and ensure
the lights are enabled via
the iAquaLink app. Check
or reset the GFCI. Make
sure 120 volts has not been
used in the installation. If so,
damage is assured and is
not warrantable.
Separate each light and
independently wire 14VAC
to a single light only. Repeat
this process for each light.
If the junction box is being
used, then check for proper
connection of the light
cord. Verify that the correct
wire gauge is being used
between the transformer and
junction box.
Confirm lights are powered
by the Infinite WaterColors
LED Light Controller. If
not, then connect and try
again. If they're powered,
then check the RS-485
connection.
Check that lights are in the
same zone, or that all zones
are set to the same color.
CAN/CSA C22.2 NO.89
ETL LISTED
CONFORMS TO
UL STD 676
CERTIFIED TO