Gardena 4054-20 Manuale rapido - Pagina 2
Sfoglia online o scarica il pdf Manuale rapido per Tagliaerba Gardena 4054-20. Gardena 4054-20 4.
Stampa la pagina
GETTING STARTED WITH
THE GARDENA ROBOTIC LAWNMOWER
1. Installing the charging station
See chapters 3.3.1 and 3.4.1 in the supplied operator's manual or on the
GARDENA website (www.gardena.com).
1. Place the charging station on a flat, level surface where there is open space.
2. Connect the low voltage cable to the charging station and the power supply.
3. Connect the power supply to a 100-240 V wall socket.
4. Press the ON/OFF button to turn the product on. Place the product in the charging
station to charge the battery while the boundary wire is laid.
NOTE: Do not continue with any product settings before the installation is complete
(1-4).
2. Laying the boundary wire
See chapter 3.3.3 in the supplied operator's manual or on the
GARDENA website (www.gardena.com).
1. Lay the boundary wire so that it forms a loop around the
whole work area.
2. Make an eyelet at the point on the boundary wire where the
guide wire is later connected.
1. STOP button
2. LED for function check of the
boundary and guide wires
3. Charging station
4. Display
5. Keypad
6. ON/OFF button
7. Start button
P01_P02_QG_USEN.indd 2
0 cm / 0"
2
10 cm / 4"
30 cm / 12
"
1
1
3
3
2
2
6
5
1
10 cm / 4"
35 cm / 14"
4
7
2019-02-06 14:50:01