Lexmark C925 Manuale dell'amministratore - Pagina 11

Sfoglia online o scarica il pdf Manuale dell'amministratore per Stampante Lexmark C925. Lexmark C925 20. Setup sheet
Anche per Lexmark C925: Manuale dell'amministratore (12 pagine), Manuale di connessione (7 pagine), Nota di rilascio (4 pagine), Manuale dell'amministratore (13 pagine), Manuale di manutenzione (15 pagine), Manuale (14 pagine), Manuale dell'amministratore (12 pagine), Riferimento rapido (10 pagine), Paper Manual (3 pagine), Mappa del menu (2 pagine), Manuale di trasloco (2 pagine), Manuale delle forniture (2 pagine), Manuale informativo (1 pagine), Manuale dei difetti di stampa (1 pagine), Installazione (2 pagine), Riferimento rapido (12 pagine), Servizio di formazione (18 pagine)

Stampa la pagina
Lexmark C925 Manuale dell'amministratore
Updating the network license
Using the Embedded Web Server
1
Click Solutions.
2
Under Installed Solutions, click the appropriate application link.
3
Click License > Update License.
4
Select Network.
5
Click Update License.
Using MarkVision Professional
1
In MarkVision Professional, select the device where the application is installed.
2
Click Settings > Embedded Solutions > Solutions Management.
3
Under the appropriate application, click Update License.
4
In the Update License window, select Use a network license server.
5
Click Update License.

Configuring Eco-Settings using the Embedded Web Server

Configuring energy- and paper-saving options

1
Access the application configuration settings from the Embedded Web Server or MarkVision Professional.
2
Adjust the following settings as necessary:
•
Eco Mode—Choose Off, Energy, Energy/Paper, or Paper.
Note: If your printer model supports duplex printing, then you will be able to print on both sides of the paper.
Choosing Energy/Paper will automatically set 2-Sided Printing and Sleep Mode to default values. Additional
changes made to these settings through the Embedded Web Server will be ignored.
•
Standby Mode—Type the number of minutes (1–240) the printer waits before it enters Standby Mode.
•
Sleep Mode or Power Saver—Type the number of minutes (1–240) the printer waits before it enters Sleep
Mode or Power Saver mode.
•
Screen Brightness—Type a screen brightness percentage (20–100).
•
2-Sided Printing—Choose 1-Sided, 2-Sided Long Edge, or 2-Sided Short Edge.
•
Darkness or Toner Darkness—Choose a toner darkness value (1–5).
•
Quiet Mode—Select this check box to reduce the amount of noise produced by the printer.
Note: When this option is selected, printer engine motors do not start until a print job is ready to print. You
may notice a short delay before the first page is printed, as well as a reduction in processing speed.
•
Lock UI—Select this check box to prevent users from changing Eco-Settings from the printer control panel.
3
Do one of the following:
Configuring the application
11