Avaya E169 Istruzioni - Pagina 2

Sfoglia online o scarica il pdf Istruzioni per Telefono IP Avaya E169. Avaya E169 2. Using the avaya e169 media station as a bluetooth speakerphone
Anche per Avaya E169: Riferimento rapido (10 pagine)

Stampa la pagina

Connecting smart devices with

Bluetooth pairing

Use this task to make a Bluetooth connection from your

smart device and the media station. Once connected, you

can use the speakerphone for cellular calls or play music

from your smart device.

1. Enable Bluetooth on your smart device. For example:

2. Put the media station into pairing mode by pressing

and holding the Call/Volume button,

station until you hear a single click.

After you release the button, the media station plays

the message "Pairing mode: waiting for connection."

Your smart device should display a Bluetooth

connection with the media station.

3. Tap the E169 Media Station icon on your smart device

and confirm that the status is connected. This might

take a few minutes.

Removing Bluetooth connections

and subscriptions

If you need to switch to another Bluetooth device, you

must clear the smart device profile from the media station.

You can remove a Bluetooth subscription in either of the

following ways:

• Using the media station Call/Volume button.

• Using the smart device Settings menu.

If you are having problems getting a smart device to

connect with the media station, remove the connection

before trying to connect again.

Depending on how you remove the Bluetooth connection,

you might have to use your smart device Bluetooth menu

to disconnect the media station.

Removing connections

1. Using the media station Call/Volume button,

press and hold the Call/Volume button until you hear

two clicks.

The media station plays the message "Disconnecting,"

followed by a high-to-low tone sound.

Removing subscriptions

2. Using the media station Call/Volume button,

press and hold the Call/Volume button until you hear

three clicks.

The media station plays the message "Clearing all

subscriptions."

3. Using the smart device, perform the following actions:

a. Select Settings > Bluetooth.

b. Tap the Info icon.

c. Tap Forget this Device.

The system removes the Bluetooth subscription.

Resetting the media station to factory

defaults

, on the media

1. Turn off the media station.

2. Press and hold the Call/Volume button,

3. Turn on the media station or plug in the AC adapter.

4. When the Mute icon flashes, release the Call/Volume

button.

5. Turn the Call/Volume button about one click to the

right.

6. Verify that the Mute and Voice Mail icons are flashing

one time each. If the Voice Mail icon is flashing more

than once, turn the Call/Volume button counter to the

right or left until you see the Voice Mail icon flash one

time.

7. Push the Call/Volume button one time.

The media station resets to factory defaults.

Additional support links

Reference

Avaya Media

Station support

site

Avaya Media

Station Collateral

Avaya E159 and

E169 IP Media

Station Overview

and Specification

Installing and

Maintaining the

Avaya E159 and

E169 IP Media

Station

Using the Avaya

E169 IP Media

Station

Avaya E169 IP

Media Station

Quick Reference

Avaya E169 IP

Media Station

Readme

Avaya E169 IP

Media Station

Firmware/

Software

Regulatory statements

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure

limits set forth for an uncontrolled environment . This

equipment should be installed and operated with minimum

distance of 8 in or 20 cm between the radiator and your

body. This transmitter must not be co-located or operating

in conjunction with any other antenna or transmitter.

Link

https://support.avaya.com/

products/P1583/e169-media-

station/All

https://sales.avaya.com/en/general/

search-results?q=E169