KitchenAid LTE5243DQA Manuale di istruzioni per l'installazione - Pagina 8
Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Forno KitchenAid LTE5243DQA. KitchenAid LTE5243DQA 20. 30" (76.2 cm) electric built-in microwave/oven combination
Stampa la pagina
%,_J W ..Y
I;
Excessive
Weight Hazard
Use two or more people to move and install oven.
Failure to do so can result in back or other injury.
1=
2=
3=
Using 2 or more people, lift oven partially into cabinet cutout
using the oven opening as an area to grip.
NOTE: Push against seal area of oven front frame when
pushing oven into cabinet. Do not push against outside
edges.
\
_.
- c L-_-_-ccc C_C......................................
Push against seal area of front frame to push oven into
cabinet.
Push oven completely
into cabinet and center oven into
cabinet cutout.
4=
Securely fasten oven to cabinet using the #8-14 x 1" screws
(2 for single oven, 4 for double oven) provided. Insert the
screws through holes in mounting rails. Do not overtighten
screws.
5=
o
A. Mounting rail
B. Insert #8-14 x 1" screw.
On some models, the oven vent is taped to the side of the
oven.
With one #8-14 x 3/8"screw for each side of the vent, fasten
vent securely to the oven.
A
J
B
A. #8-14 x 3/8"screw
B. Oven vent
6. Replace oven racks.
7. Replace oven door(s) by inserting ends of hinges into hinge
slots in the oven frame.
8. Push hinges in as far as they will go and open the oven door.
You should feel the oven door drop into place.
9. Rotate both hinge latches back to the locked position.
10. Check that the door is free to open and close. If it is not,
repeat the removal and installation procedures. See "Remove
Oven Door" section.
11. Reconnect power.
12. Display panel will light briefly, and "PF" should appear in the
display.
13. If display panel does not light, please reference the
"Assistance
or Service" section of the Use and Care Guide or
contact the dealer from whom you purchased your oven.
8