Lexmark CS410 series Manuale di riferimento rapido - Pagina 2

Sfoglia online o scarica il pdf Manuale di riferimento rapido per Stampante Lexmark CS410 series. Lexmark CS410 series 14. Color laser printer
Anche per Lexmark CS410 series: Nota tecnica (3 pagine), Scheda di configurazione (2 pagine), Manuale (19 pagine), Manuale di stampa (8 pagine), Manuale della qualità del colore (6 pagine), Manuale di connessione (6 pagine), Paper Manual (4 pagine), Mappa del menu (2 pagine), Manuale di trasloco (2 pagine), Manuale informativo (1 pagine), Scheda tecnica (2 pagine), Scheda tecnica (2 pagine), Manuale di riferimento rapido (11 pagine), Manuale di servizio (18 pagine)

Stampa la pagina
Lexmark CS410 series Manuale di riferimento rapido
4
Press the up or down arrow button to select the paper type, and
then press
to change the settings.

Configuring Universal paper settings

The Universal paper size is a user‑defined setting that lets you print on
paper sizes that are not preset in the printer menus.
Notes:
•
The smallest supported Universal size is 76 x 127 mm (3 x 5
inches) and is loaded only in the multipurpose feeder and
manual feeder.
•
The largest supported Universal size is 215.9 x 359.9 mm (8.5 x
14.17 inches) and is loaded only in the multipurpose feeder and
manual feeder.
1
From the printer control panel, navigate to:
> Settings >
> Paper Menu >
Measure >
> select a unit of measure >
2
Press the arrow buttons until Units of Measure, Portrait
Height, or Portrait Width appears, and then press
3
Enter the preferred settings using the keypad, and then press
.
4
Press
.
Loading the 250 and 550‑sheet tray
The printer has one 250-sheet tray (Tray 1) with an integrated manual
feeder. The 250-sheet tray, the 650-sheet duo tray, and the 550-sheet
tray support the same paper sizes and types and are loaded in the same
way.
CAUTION—POTENTIAL INJURY: To reduce the risk of
equipment instability, load each tray separately. Keep all trays
closed until needed.
1
Pull out the tray completely.
Note: Do not remove trays while a job is printing or while Busy
appears on the display. Doing so may cause a jam.
2
If the paper is longer than letter‑size paper, then push the length
guide tab at the back of the tray to extend it.
> Units of
.
1
2
2
3
Squeeze the length guide tab, and then slide the guide to the
correct position for the size of the paper being loaded.
1
2
Note: Use the size indicators on the bottom of the tray to help
position the guide.