Gardena 4000/4 LCD Manuale di istruzioni per l'uso - Pagina 8
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Pompa dell'acqua Gardena 4000/4 LCD. Gardena 4000/4 LCD 17. Electronic pressure pump
Stampa la pagina
- 1. Table of Contents
- 2. Suitable Uses for Your GARDENA Elelctronic Pressure Pump
- 3. Function and Display
- 4. Safety Instructions
- 5. Using the Equipment for the First Time
- 6. Operation
- 7. Maintenance
- 8. Preparation for Storage
- 9. Troubleshooting / Service
- 10. Accessories Available
- 11. Technical Data
- 12. Warranty
6. Preparation for Storage
Winter storage / out of use:
©
Disposal:
(in accordance with
directive 20002/96/EC)
7. Maintenance
Clean built-in filter:
©
Clean non-return valve:
©
©
©
20
Empty the Electronic Pressure Pump before the first frost.
1. Unplug the pump from the mains.
2. Turn rotary switch
3. Unscrew drain bolt
The pump will be drained.
4. Store the pump in a frost-free, dry place.
Unit may not be disposed of with normal household waste but
must be disposed of in accordance with environmental
regulations.
Danger ! Electric shock !
There is a risk of injury from electric power.
➔ Pull out mains plug before undertaking any maintenance.
1. Turn rotary switch
2. If necessary, close all the shut-off devices on the intake side.
©
3. Unscrew and remove cover
of the filter chamber.
4. Draw out filter unit vertically
upwards.
5. Hold beaker
anti-clockwise 1 and draw
out 2 (bayonet fitting).
6. Clean beaker under running
water and clean the filter e.g.
with a soft brush.
7. Refit filter again in reverse order.
1. Pull out mains plug.
2. Turn rotary switch
3. If necessary, close all the shut-off
©
devices on the intake side.
4. Open all the valves so that the delivery
side is not under pressure.
5. Unscrew the drain screw bolt
drain out water.
6. Unscrew screw
holder
upwards 1 and backwards
2 into the bearing groove.
7. Unscrew cover
valve with a suitable tool.
to .START.
.
to RUN.
firmly, turn filter
©
to START.
and
and push the
of non-return
©
©
©
©