Gardena 7887 Manuale di istruzioni per l'uso - Pagina 4
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Pompa dell'acqua Gardena 7887. Gardena 7887 11. Underwater filter with fountain pump set
Anche per Gardena 7887: Manuale di istruzioni per l'uso (10 pagine)
Stampa la pagina
B
Installing underwater filter
with stepped nipple :
6
1
4. Initial Operation
A
Putting underwater filter
with fountain pump set
into operation :
9
B
Putting underwater filter
with stepped nipple into
operation:
9
The stepped nipple (½ " / ¾ " )
example, to a stream or source stone.
8
1. Screw the T-piece
7
2. Screw the stepped nipple
T-piece
3. Screw the cap
Note : In the event of an uneven foundation, the fountain can be
vertically aligned with the adjustable ball joint
1. When using a gargoyle, connect the hose of the gargoyle
to the stepped nipple
2. Place the pump with the fountain on a firm base so that the
filter housing
3. Undo the fixing nut
place nozzle tube
fixing nut
4. Connect the mains plug of the pump to
an A.C. socket.
Attention : pump starts immediately.
5. Unscrew Water Bell, Fleur-de-Lis or
Water Jets out of the nozzle tube
the fountain has the required shape.
6. Adjust the size of the fountain with the
regulating valves
7. Adjust the required amount of water of
the gargoyle with the regulating valves
Note : When using a ¾ " hose, the front part of the stepped
nipple can be cut off with a saw.
1. Connect the hose of the stream to the stepped nipple
2. Place the pump with the stepped nipple on a firm base so that
the filter housing
under water).
3. Connect the mains plug of the pump
to an A.C. socket.
Attention : pump starts
immediately.
4. Adjust the required amount of water
with the regulating valves
6
can be used for connection, for
7
onto the adapter
6
onto the side outlet of the
7
.
8
onto the T-piece
6
.
9
is completely covered by water.
0
of the ball joint
3
vertically and screw
0
tight again.
5
.
9
is completely covered by water (max. 2 m
A
.
1
.
7
.
2
.
2
,
3
until
2
A
A
.
6
.
A
3
5
0
6
6
11