Gardena 8877 Manuale di istruzioni per l'uso - Pagina 8
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Trimmer Gardena 8877. Gardena 8877 14. Cordless hedge trimmer
Anche per Gardena 8877: Manuale di istruzioni per l'uso (14 pagine)
Stampa la pagina
Disposal :
(in accordance with
RL2002 / 96 / EC)
Disposal of
batteries :
7. Maintenance
Cleaning the Hedge Trimmer :
A
0
8. Troubleshooting
A
0
Fault
Hedge trimmer does
not start.
18
The product must not be added to normal household waste. It
must be disposed of in line with local environmental regulations.
v Important : Make sure that the unit is disposed of via your
municipal recycling collection centre.
The GARDENA Cordless Hedge Trimmer contains lithium-ion
batteries that should not be discarded with normal household
waste at the end of their life.
Li-ion
Important :
Please return the lithium-ion batteries to your GARDENA dealer
or dispose of them properly at a public recycling centre.
1. Discharge lithium-ion batteries completely.
2. Dispose of lithium-ion batteries properly.
DANGER ! Risk of physical injury !
Cutting injuries can be caused if the hedge trimmer
A
does switch on unintentionally.
V Remove the battery before maintenance (see
ATTENTION ! Damage to the hedge trimmer !
V Never clean the hedge trimmer under running
A
1. Clean the hedge trimmer with a damp cloth.
2. Where necessary, clean the trimmer blade
and lubricate with a low viscosity oil (e.g. GARDENA Spray-oil
Art. 2366). Avoid contact of the oil with the plastic parts and
wear gloves.
DANGER ! Risk of physical injury !
Cutting injuries can be caused if the hedge trimmer
A
does switch on unintentionally.
V Remove the battery before troubleshooting
Possible cause
Battery is flat.
Battery not pushed onto
the handle properly.
4. Initial Operation) and slide the protective
0
cover
over the cutter blade.
water or with a water jet (in particular a high
pressure water jet).
(see 4. Initial Operation) and slide the protective
0
cover
over the cutter blade
Remedy
v Charge battery (see
v Push battery onto the handle
A
with a brush
A
.
4. Initial Operation).
and make sure that the
locking buttons snaps in
correctly.