Corvus systems TRS-80 II Manuale di installazione - Pagina 18

Sfoglia online o scarica il pdf Manuale di installazione per Desktop Corvus systems TRS-80 II. Corvus systems TRS-80 II 19. Corvus systems disk system installation guide

Stampa la pagina
29.
Type 64
1
ENTER
1
The screen displays:
PUT, GET, OR FILL (P/G/F)
30.
Exit the PUTGET program by holding down the <CTRL>
key and pressing C.
The screen displays:
31.
The disk is now initialized. The Corvus link may now be
installed. The link is installed by running a program. The
name of the program depends on the model drive
being linked.
For the Model
6
type CLINK7FV
.1
ENTER
1
For the Model 11 type CLINK7TN
1
ENTER
1
For the Model 20 type CLINK7TW 1
ENTER
1
The screen displays:
--- CORVUS LINK INSTALLEO
---
The software setup has now been completed. The Corvus
hard disk is now initialized for use with a TRS-80 Model II
computer and the Corvus link has been installed.
Testing the
Drive
The procedure described below is a simple test of the
Corvus drive. Note that all standard CP 1M commands can
be used with the Corvus drive.
1.
Type A:PIP C:=B:*.DOC 1
ENTER
I
The screen displays:
COPYING-
INDEX.oOC
CERROR.DOC
CDIAGNOS.DOC
16