Broadata LINK BRIDGE LBC-HDBT-T/R-48-KM Manuale - Pagina 5

Sfoglia online o scarica il pdf Manuale per Estensore Broadata LINK BRIDGE LBC-HDBT-T/R-48-KM. Broadata LINK BRIDGE LBC-HDBT-T/R-48-KM 16. Hdbaset hdmi transmission with 48v poh over 100m and usb keyboard/mouse

Stampa la pagina

LBC-HDBT-T/R-48-KM User Manual

Link Bridge

HDBaseT HDMI Transmission w/48V PoH over 100m & USB Keyboard/Mouse

2.0 OPERATION CONTROLS AND FUNCTIONS

2.1 Transmitter Front Panel

DC 48V POWER

IR IN2 IR OUT1

1. DC 48V & POWER LED: Plug the 48V DC power supply into

the unit and connect the adaptor to an AC outlet. Please do

follow the label on adapter to connect the black cable to ground

pin of connector. This LED will illuminate when the unit is

connected to a power supply.

2. IR IN 2: IR IN 2 is considered as IR extender which to connect

to the supplied IR Extender cables for IR signal reception.

Ensure that remote being used is within the direct line-of-sight

of the IR Extender.

3. IR OUT 1: IR OUT 1 is considered as IR BLASTER which

connects to the supplied IR Blaster cable for IR signal

transmission. Place the IR Blaster in direct line-of-sight of the

equipment to be controlled.

4. USB: For receiving data from receiver and firmware update

use.

5. RS-232 IN: Connect to a PC or Laptop via RS-232 terminal

to D-Sub 9-pin cable for the transmission of RS-232 commands.

6. UPDATE: For firmware update use. Under normal usage, do

not move the switch to the left

USB

Broadata Technical Support, (800) 214-0222

RS-232 IN

UPDATE

