Gardena EasyCut 23/18V P4A Manuale dell'operatore - Pagina 6
Sfoglia online o scarica il pdf Manuale dell'operatore per Trimmer Gardena EasyCut 23/18V P4A. Gardena EasyCut 23/18V P4A 9. Battery trimmer
Stampa la pagina
When the battery charge indicator
the battery is being charged.
When the battery charge indicator
permanently green the battery is completely charged
(Charging time, see 7. TECHNICAL DATA).
4. Examine the charge status regularly while you charge.
(B)
5. When the battery
is completely charged, you can disconnect the
(B)
(C)
battery
from the charger
Meaning of the Indication Elements:
Indication on the charger [ Fig. O3 ]:
Flashing of the Battery
The charging procedure is indicated by flashing of the battery charge
Charge Indicator
(Lc)
(Lc)
indicator
.
Note: The charging procedure is only possible when the battery
temperature is within the allowable charging temperature range,
see 7. TECHNICAL DATA.
Continuous Lighting
Continuous lighting of the battery charge indicator
of the Battery
the battery is fully charged or that the temperature of the battery is
(Lc)
Charge Indicator
not within the allowable charging temperature range and can therefore
not be charged.
When the battery is not inserted, continuous lighting of the battery
(Lc)
charge indicator
socket outlet and that the battery charger is ready for operation.
Battery charge status indication
After starting the product, the battery charge status indication
is displayed for 5 seconds.
Battery charge status
67 – 100 % charged
34 – 66 % charged
11 – 33 % charged
0 – 10 % charged
If the LED
(L1)
flashes green, the battery must be charged.
(Wp)
If the error LED
is illuminated or flashing, see 6. TROUBLESHOOTING.
To set the working position:
Working position 1 [ Fig. O5 ]:
For standard trimming.
Working position 2 [ Fig. O6 /O7 ]:
Trimming beneath obstacles
The tube can be lowered from standard position 1 to two lowered
positions 2 or 3 for trimming beneath obstacles.
1. Put the trimmer on the floor.
2. Hold the trimmer by the tube
(7)
(10)
push the unlock button
with one finger.
(10)
3. Push the unlock button
and lower the tube
position.
(10)
4. Release the unlock button
and let the tube
Working position 3 (only for Art. 14701) [ Fig. O8 /O9 ]:
Cutting at lawn edges.
CAUTION! The trimmer may only be used when the trimmer head
is locked at 0° or 90°.
(1)
To rotate the trimmer head
position 1.
1. Hold the trimmer by the tube
(7)
(11)
push the unlock button
with one finger.
2. Push the unlock button
(11)
and rotate the trimmer head
0° to 90° until it engages.
(11)
3. Release the unlock button
and let the tube
To adjust the tube length [ Fig. O10 ]:
DANGER!
The product must not be used when the tube is completely
inserted (transport position).
(6)
1. Loosen the clamping sleeve
(7)
2. Pull out the tube
to the required length.
3. Tighten the clamping sleeve again
To adjust the position of the additional handle [ Fig. O11 ]:
The position of the additional handle can be adjusted to your body height.
6
(Lc)
at the charger flashes green
(Lc)
at the charger illuminates
.
(Lc)
indicates that
indicates that the mains plug is inserted in the
(P)
on the product [ Fig. O4 / O14 ]:
Battery charge status indication
(L1)
,
(L2)
and
(L3)
illuminate green
(L1)
(L2)
and
illuminate green
(L1)
illuminates green
(L1)
flashes green
with both hands so that you can
(7)
to the required
(7)
engage again.
to 90°, the tube must be in standard
with both hands so that you can
(1)
from
(7)
engage again.
.
(6)
.
(12)
1. Pull the lever
.
2. Tilt the additional handle
(12)
3. Release the lever
again.
If the trimmer is correctly set to the body height, the posture is upright and
the trimmer head in working position 1 is tilted forwards slightly.
v Hold the trimmer by the main handle
such a manner that the trimmer head is tilted forwards slightly.
To adjust the plant guard:
– Work position [ Fig. O12 ]
– Park position [ Fig. O13 ]
v Pull off the plant guard
it engages.
To start the trimmer [ Fig. O1 /O14 ]:
DANGER! Risk of injury!
Risk of injury if the product does not stop when you
release the start lever.
v Do not bypass the safety devices or switches. For example do
not attach the start lever to the handle.
The product is provided with a two-switch safety device (start
lever with starting lockout) to prevent the product from being
(P)
turned on by accident.
To start:
1. Put the battery
(B)
into the battery holder
2. Hold the additional handle
3. Hold the main handle
lockout
(15)
forward and pull the start lever
The trimmer starts and the battery charge status indication
displayed for 5 seconds.
4. Release the starting lockout
CAUTION! Avoid contact of the plastic blade and the blade carrier with
hard objects (walls, stones fences etc.) to prevent the plastic blade and
the blade carrier from wearing or breaking.
To stop:
1. Release the start lever
The trimmer stops.
2. Push the locking button
(D)
holder
.
4. MAINTENANCE
DANGER! Risk of injury!
Cut injury when the product starts accidentally.
v Wait for the plastic blade to stop and remove the battery
before you maintain the product.
To clean the trimmer [ Fig. M1 ]:
DANGER! Risk of injury!
Risk of injury and risk of damage to the product.
v Do not clean the product with water or with a water jet
(in particular high-pressure water jet).
v Do not clean with chemicals including petrol or solvents. Some
can destroy critical plastic parts.
The airflow slots must always be clean.
1. Clean the airflow slots
2. Clean all movable parts after each operation. Especially remove any
grass and dirt from the protective cover
To clean the battery and the battery charger:
Make sure that the surface and the contacts of the battery and the battery
charger always are clean and dry before you connect the battery charger.
Do not use running water.
v Battery charger: Clean the contacts and the plastic parts with a soft
and dry cloth.
v Battery: Occasionally clean the ventilation slots and the terminals on
the battery using a soft brush that is clean and dry.
(13)
to the desired position.
(14)
and additional handle
(5)
and put it on into the required position until
(D)
until it audibly engages.
(13)
with one hand.
(14)
with the other hand, slide the starting
(16)
.
(15)
again.
(16)
.
(A)
and remove the battery
(B)
from the battery
(17)
with a soft brush (do not use a screwdriver).
(2)
.
(13)
in
(P)
is