Gardena EasyCut Li-18/23 Manuale di istruzioni per l'uso - Pagina 5
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Trimmer Gardena EasyCut Li-18/23. Gardena EasyCut Li-18/23 17. Accu turbotrimmer
Stampa la pagina
3. Assembly
Assembling the trimmer:
o
h
ß
R
j
g
t
2
3
w
ö
ß
ß
A2
A1
q
4. Initial Operation
Charging the battery:
CAUTION!
The handle may only be assembled if the cable
between the handle and the shaft is in a perfect
condition. The handle may not be assembled if
the cable is damaged. Contact GARDENA customer
service in such a case.
CAUTION!
The trimmer may only be operated provided that the
protective cover
1
1. Carefully remove the handle
the packaging. In doing so, no stress may be exerted upon the
cable.
2. Ensure that the threaded collar
(padlock symbol open).
3. Slide the handle
In doing so, the cable may not become twisted or jammed.
4. By pulling on the handle
to the shaft
cannot be separated.
0
5. Close the threaded collar
l
6. Pull the lock
both of the snap-fits
and, with the grooves
holder
7. From the front, push the plant guard
groove
the impeller
the kink pointing upwards).
8. Place the protective cover
9. Turn the protective cover
trimmer head entirely (the two arrows
from each other).
10. Rotate the protective cover
engages.
WARNING!
Overvoltage damages batteries and the battery
charger.
v E nsure the correct mains voltage.
q
is assembled.
1
1
onto the shaft
1
, check whether it is firmly fixed
2
. Once assembled, the handle
t
(padlock symbol closed).
o
belonging to the additional handle
g
belonging to the additional handle
ß
pointing forwards, snap them into the
R
j
.
0
of the trimmer head
k
can rotate freely (i.e. insert the bow with
q
q
until it can be pushed over the
q
together with the shaft
t
is in an open position
2
until it audibly engages.
1
and shaft
h
ö
into the upper
3
. In doing so, ensure that
on top of the trimmer head
ß
ß
,
are directly across
A1
A2
anti-clockwise until it audibly
2
from
2
, push in
h
3
.
17