Lexmark MS510 Series Manuale - Pagina 14

Sfoglia online o scarica il pdf Manuale per Stampante Lexmark MS510 Series. Lexmark MS510 Series 20. Machine type 4514-630, 4514-635, 4514-636
Anche per Lexmark MS510 Series: Nota tecnica (3 pagine), Manuale di trasloco (2 pagine), Manuale di connessione (6 pagine), Manuale di stampa (5 pagine), Riferimento rapido (18 pagine), Paper Manual (4 pagine), Manuale informativo (1 pagine), Scheda di configurazione (2 pagine), Specificazioni (2 pagine), Manuale di servizio (18 pagine), Riferimento rapido (17 pagine)

Stampa la pagina
Lexmark MS510 Series Manuale
Action
Step 2
From the printer control panel, set the paper texture, type, and weight in the
Paper menu to match the paper loaded in the tray.
Do the paper texture, type, and weight match the paper in the tray?
Step 3
a
Load paper from a fresh package.
Note: Paper absorbs moisture due to high humidity. Store paper in its
original wrapper until you use it.
b
Resend the print job.
Do streaked vertical lines appear on prints?
Step 4
a
Reinstall the imaging unit.
1
Remove the toner cartridge, and then the imaging unit.
Warning—Potential Damage: Do not expose the imaging unit to direct
light for more than 10 minutes. Extended exposure to light may cause
print quality problems.
2
Install the imaging unit, and then the cartridge.
b
Resend the print job.
Do streaked vertical lines appear on prints?
Step 5
Replace the imaging unit, and then resend the print job.
Do streaked vertical lines appear on prints?

Horizontal voids appear on prints

Leading edge
Trailing edge
Print Quality Guide
Page 14 of 19
Yes
No
Go to step 3.
Do one or more of the
following:
•
•
Go to step 4.
The problem is solved.
Go to step 5.
The problem is solved.
Contact
customer
The problem is solved.
support
at
http://support.lexmark.
com
or your service
representative.
Specify the paper
texture, type, and
weight from the tray
settings to match the
paper loaded in the
tray.
Change the paper
loaded in the tray to
match the paper
texture, type, and
weight specified in
the tray settings.