Gardena Flex Manuale dell'operatore - Pagina 6
Sfoglia online o scarica il pdf Manuale dell'operatore per Attrezzature per prato e giardino Gardena Flex. Gardena Flex 16.
Anche per Gardena Flex: Manuale dell'operatore (18 pagine), Manuale dell'operatore (15 pagine), Manuale dell'operatore (16 pagine)
Stampa la pagina
3. FUNCTION
v (Fig. F)
The settings can be adjusted when the control
panel is removed. You can change the settings
or move to the next setting by turning the outer
wheel. Pressing the
respective input. Pressing the button for a mini-
mum of 3 seconds locks or unlocks the display.
Time
Connected
Sensor
sensor
Start Time
(0 – 23) hrs (0-59) min.
Run Time
(0 – 29) sec.
(0 – 99) min.
ON
Frequency
4, 6, 8, 12, 24,
ON
48, 72 hrs
*
max. 1 year
If you will be away for long periods of
min. 4 weeks
time, please replace the battery when
the battery symbol blinks – otherwise
max. 4 weeks
the watering system may fail.
14
button confirms the
Active
Watering
Battery
Condition *
Soil Moisture
0 drops = Sensor
detects "dry"
3 drops = Sensor
min
sec
detects "wet", no
time-controlled
watering
hrs
Timeplan
OFF
active /
deactive
too weak for opening again
4. PROGRAMMING
Fig. G:
1 Set time (hours) | 2 Set time (mins) |
3 Select schedule | 4 Confirm schedule
Please note: If starting in the past and at a fre-
quency of 4, 6, 8, 12 hours, the start time will
be automatically adjusted after input.
Watering tip: For pot plants that required small
amounts of water at regular intervals, short water-
ing cycles are ideal in combination with a drip
irrigation system.
The saved watering schedule can be activated or
deactivated by pressing ON / OFF.
Fig. I:
1 Active watering | 2 Change watering duration |
3 Stop active watering at any time
By pressing the
button, manual watering can
be started or stopped at a desired time (see fig. I ).
Soil Moisture Sensor, Art. 1188,
(optionally available)
v (Fig. D):
1 Menu: Soil Moisture Sensor
After a soil moisture sensor is connected,
the word "Sensor" will be displayed.
This can last for up to 1 minute. The soil moisture
level at which a watering will not be carried out
as per the schedule can be set using the switching
point controller on the soil moisture sensor
(see GARDENA Soil Moisture Sensor Operator's
manual). This does not affect active (manual)
watering.
v (Fig. G – I)