Gardena GH 2300 Manuale di istruzioni per l'uso - Pagina 4
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Attrezzature per prato e giardino Gardena GH 2300. Gardena GH 2300 10. Garden shredder
Stampa la pagina
Interruptions of Work / Environment :
Never leave the shredder unattended at the
working area. If you interrupt your work
store the unit in a safe place.
Before moving the shredder to a different
place, always switch off the motor, unplug the
mains plug, and wait until the blades have
3. Assembly
Assembling the Trolley :
7
2
8
9
4. Putting into Operation
Shredding :
C
B
1. Push the axle
lower holes of the trolley
2. Push the wheels
4
ers
1
1
axle
3
3. Secure the wheels
washers
4. Push the wheel caps
the wheels
8
5. Insert the cross strut
trolley
9
6. Stand the shredder on the feeding funnel and fit the trolley
7. Fix the trolley
2
washers
Danger ! Risk of injury !
A
V Always wear gloves, eye protection and ear pro-
Switching On the Shredder :
Make sure the feeding funnel is empty before you switch on
the shredder.
1. Plug the mains power extension cord into the shredder socket
B
and then into a mains power socket.
2. Press the green ON switch
Switching Off the Shredder :
The cutting blades continue to move for a few
A
seconds after you switch off the shredder.
Do not turn off the motor until the shredder is completely empty
otherwise it may be difficult to turn the shredder on again.
v Press the red OFF switch
stopped moving.
Never use the unit when it is raining or in
damp or wet areas.
Do not operate your shredder near swimming
pools or garden ponds.
Please observe the prescribed local quiet
times.
1
through the two
2
.
3
and wash-
onto both sides of the
.
3
and
4
with a cotter pin
6
onto
3
.
7
through the two upper holes of the
2
.
2
with the 4 bolts
9
.
tection when operating your shredder.
C
C
.
5
.
5
∅
8
5 x 16
and semi-circular
.
3
4
6
2
.
11