KitchenAid KHHC2090SBL 2.0 Manuale di istruzioni per l'installazione - Pagina 4

Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Forno a microonde KitchenAid KHHC2090SBL 2.0. KitchenAid KHHC2090SBL 2.0 12. Installation instructions

Stampa la pagina

1. Product Dimensions

Remove Mounting Plate

NOTE: To avoid possible damage to the work surface, cover the

work surface.

1. Remove any remaining contents from the microwave oven

cavity.

2. Remove the mounting plate by peeling off the strips of tape

that attach it to the back of the microwave oven, and set the

mounting plate aside.

A. Mounting plate

B. Back of microwave oven

C. Tape (multiple locations)

3. Tape the microwave oven door closed so that door does not

swing open while the microwave oven is being handled.

NOTE: To avoid damage to the microwave oven, do not grip or

use the door or door handle while the microwave oven is being

handled.

INSTALLATION INSTRUCTIONS

Convert Microwave Oven to

External Venting

(for wall or roof venting only)

The microwave oven is set for recirculation installation. For wall or

roof venting, changes must be made to the venting system. See

"Venting Design Specifications" section.

NOTE: Skip this section if you are using recirculation installation.

Keep the damper assembly in case the venting method is

changed, or the microwave oven is reinstalled in another location

where wall or roof venting may be used.

To prepare the microwave oven for wall or roof venting, the vent

deflector (L-shaped metal bar) must be installed, and the

appropriate damper vent opening must be uncovered.

To Install Vent Deflector:

1. Gently pull the rings and lift vent screen from the top of the

microwave oven.

A. Top of microwave oven

B. Vent screen

C. Rings

2. With vent deflector oriented as shown (wide side down), slide

it back and under the back edge of the vent opening.

A. Vent opening

B. Vent deflector