Makita 12V 8413D Manuale di istruzioni - Pagina 12

Sfoglia online o scarica il pdf Manuale di istruzioni per Trapano Makita 12V 8413D. Makita 12V 8413D 19. 12v / 14.4 v / 18 v cordless percussion-driver drill equipped with electric brake

Stampa la pagina

ASSEMBLY

Installing or removing driver bit or drill bit

CAUTION:

Always be sure that the tool is switched off and the battery cartridge is removed before

installing or removing the bit

Turn the sleeve counterclockwise to open

the chuck jaws. Place the bit in the chuck

as far as it will go. Turn the sleeve clock-

wise to tighten the chuck.

To remove the bit, turn the sleeve counter-

clockwise.

When not using the driver bit, keep it in the

bit holders. Bits 45 mm (1-3/4") long can

be kept there.

Side grip (auxiliary handle)

Always use the side grip to ensure operat-

ing safety. Install the side grip

that the

teeth on the grip fit in between the protru-

sions on the tool barrel.

Then tighten the grip by turning clockwise

at the desired position. It may be swung

360" so as to be secured at any position.

Teeth

Grip base

Side grip

Loosen

Tighten