Makita 6010DWK Manuale di istruzioni - Pagina 7
Sfoglia online o scarica il pdf Manuale di istruzioni per Trapano Makita 6010DWK. Makita 6010DWK 14. 10 mm (3/8")
Anche per Makita 6010DWK: Manuale di istruzioni (9 pagine), Manuale di istruzioni (17 pagine)
Stampa la pagina
Bit installation & removal
CAUTION :
Always set the Forward-Reverse switch lever to NEUTRAL when installing, removing or
adjusting bits or accessories.
Chuck
When installing
a
drill bit, notice that
there are three holes in the chuck
a t
which you must use the key for tighten-
ing. Insert the chuck key in any of the 3
holes and turn to the left (counterclock-
wise) to release jaws of chuck. Insert the
bit and tighten with chuck key to the
right. Tighten evenly
a t
a l l
three holes in
sequence.
1
Clip-on
chuck
key
Overload protector
The overload protector automatically
cuts in t o break the circuit and the
button pops out, whenever heavy work i s
prolonged. Wait 20-30 seconds before
pressing the restart button (on housing
in back) to resume operation. Your finger
should not be on the trigger when you
press the restart button, however.
/
Overload protector
I"