Makita 6092DW Manuale di istruzioni - Pagina 4

Sfoglia online o scarica il pdf Manuale di istruzioni per Trapano Makita 6092DW. Makita 6092DW 17. 10 mm (3/8") cordless driver drill equipped with electric brake

Stampa la pagina

IMPORTANT

Length of Cord (Feet)

AWG Size of Cord

SAFETY

100

150

IN STRU CTI 0 N S

2 .

5 .

SAVE THESE INSTRUCTIONS

- This manual

contains important safety and operating instructions for battery charger.

Before using battery charger, read all instructions and cautionary markings

on (1) battery charger, ( 2 ) battery, and ( 3 ) product using battery.

CAUTION - To reduce risk of injury, charge only MAKITA Battery 7000,

9000 or 9100. Other types of batteries may burst causing personal injury

and damage.

Do not expose charger to rain or snow.

Use of an attachment not recommended or sold by the battery charger

manufacturer may result in a risk of fire, electric shock, or injury to persons.

To reduce risk of damage to electric plug and cord, pull by plug rather than

cord when disconnecting charger.

Make sure cord is located so that it will not be stepped on, tripped over,

or otherwise subjected t o damage or stress.

An extension cord should not be used unless absolutely necessary. U s e of

improper extension cord could result in a risk of fire and electric shock. I f

extension cord must be used, make sure:

a. That pins on plug of extension cord are the same number, size, and shape

b. That extension cord

properly wired and in good electrical condition; and

c. That wire size is at least a s large a s the one specified in the table below.

TABLE 1

RECOMMENDED MINIMUM AWG SIZE FOR

EXTENSION CORDS FOR BATTERY CHARGERS

a s those of plug on charger;

9. Do not operate charger with damaged cord

plug - replace them imme-

diately.

I O . Do not operate charger if it has received a sharp blow, been dropped, or

otherwise damaged in any way; take it t o a qualified serviceman.

11. Do not disassemble charger or battery cartridge; take it to a qualified

serviceman when service or repair is required. Incorrect reassembly may

result in a risk of electric shock or fire.

12. To reduce risk of electric shock, unplug charger from outlet before attemp-

ting any maintenance or cleaning. Turning off controls will not reduce this

risk.