Makita 6203DWAE Manuale di istruzioni - Pagina 9

Sfoglia online o scarica il pdf Manuale di istruzioni per Trapano Makita 6203DWAE. Makita 6203DWAE 17. Cordless driver drill equipped with electric brake
Anche per Makita 6203DWAE: Informazioni tecniche (5 pagine)

Stampa la pagina

*If you charge a battery cartridge from a just-operated tool or

battery cartridge which has

been left in a location exposed to direct sunlight or heat for a long time, the charging light

may flash in red color. If this occurs, wait for a while. Charging will begin after the battery

cartridge cools. The battery cartridge will cool faster if you remove the battery cartridge

from the fast charger.

*If the charging light flashes alternately in green and red color a problem exists and charg-

ing is not possible. The terminals on the charger or battery cartridge are clogged with

dust

the battery cartridge

is worn

out

damaged.

*If you wish to charge two battery cartridge, allow 15 mimutes between charging on the

fast charger.

ASSEMBLY

Installing or removing driver bit or drill bit

CAUTl ON :

Always be sure that the tool is switched off and the battery cartridge is removed before

installing or removing the bit

Hold the ring and turn the sleeve counter-

clockwise to open the chuck jaws. Place

the bit in the chuck as far as it will go. Hold

the ring firmly and turn the sleeve clock-

wise to tighten the chuck.

To remove the bit, hold the ring and turn

the sleeve counterclockwise.

When not using the driver bit, keep it in the

bit holders. Bits 45 mm (1-3/4") long can be

kept there.

Tighten

Slee

Ring

:ve

Bit

Bit holder