Alien green Mostat Istruzioni per l'installazione Manuale - Pagina 12

Sfoglia online o scarica il pdf Istruzioni per l'installazione Manuale per Termostato Alien green Mostat. Alien green Mostat 15.

CONFIGURATIONS OF THE ROOM SENSOR

Take the room sensor out of the box, and move its lid off.

Remove the pull to start tab for activating the battery, as shown on the picture.

Take the room sensor to the central heating boiler, and push the button once;

When the button is pushed, the blue light starts blinking, which means the device

is ready for configuration option.

At this moment push the button on process control block (PCB) in

the central heating boiler once so that the

During this activity the configuration parameters are exchanged

between the process control block (PCB) and the room sensor.

After the configuration is successfully completed, the green light

will blink three times on the room sensor. If the configuration is

successfully complete, push the button again.

If the configuration is NOT successfully complete, push again the

button on the process control block (PCB) and the room sensor.

CAUTION: While replacing the battery, press the PCB with a finger of one

hand and use another hand to carefully take the battery out, without damaging the device.

Use only Lithium FR6 or Alkaline LR6 batteries, preferably, Energizer or Duracell.

Status

light starts blinking.

RUN

RST

Light

Button