A&L Furniture Hickory Swivel Bar Chair with Arms Istruzioni per il montaggio - Pagina 2
Sfoglia online o scarica il pdf Istruzioni per il montaggio per Arredamento per interni A&L Furniture Hickory Swivel Bar Chair with Arms. A&L Furniture Hickory Swivel Bar Chair with Arms 2.
Stampa la pagina
PARTS
(included)
Chair Seat (1)
Chair Base (1)
Left Arm (1)
Right Arm (1)
STEP 1
Place the chair seat on the base and lift the front of the seat up a little bit. (See photo 1.) Insert 2 bolts
through the swivel and push them down through the predrilled holes in the base. (See photo 2.) Now you
will need to spin the seat around a half turn to repeat the procedure in the back (the swivel bracket is
angled and has a wider opening on one side. Therefore, you need to spin the seat partway around for the
last 2 bolts).
STEP 2
You should now have 4 bolts sticking down through the bottom of the base. (See photo 3.) Attach the
flange nuts and tighten with 7/16" wrench. (See photo 4.)
STEP 3
Attach the arms as shown. (See photos 5, 6, & 7.) Tighten the bolts with the Allen wrench. (Do not fully
tighten either one until both are started into the threads.)
D
A
photo 5
A
B
photo 1
photo 3
HARDWARE
¼" x 1¾" Bolts (8)
a
Flange Nuts (4)
b
c
Allen Wrench (1)
TOOLS NEEDED
7/16" Wrench
a
b
a
photo 6
(included)
photo 2
b
b
b
photo 4
a
photo 7
a