AlienBees ABR800 Manuale di istruzioni per l'uso - Pagina 12

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Camera Flash AlienBees ABR800. AlienBees ABR800 16. Ringflash

Attaching the Front Cover / Diffuser

When traveling with the unit, the cover should be in place to protect the flashtubes and

modeling lamps. The unit will ship with the cover in place for this reason. When in use,

however, the ABR800 may be used with or without the diffuser.

To attach the front cover / diffuser, first ensure that the Reflector Lock on the back

control panel of the unit is pointing left in the "UNLOCK" position.

Next, line up the smaller, inside ring of the cover with the smaller, inside ring on the

circular face of the ringflash housing. You will notice that there are three protruding

ledges positioned around the inside edge of the ringflash housing – these three ledges

correspond to the three raised panels on the frosted cover.

Slide the frosted cover inside the center hole of the ringflash housing, allowing the

three raised panels on the cover to fit naturally between the three ledges on the

housing. Push gently until the cover will go no fur ther and is comfor tably seated inside

this center hole.

Each raised panel on the frosted cover has a cut inser t, making an "L" shape. To

position the cover, rotate it around the center hole in the housing towards the raised

ledges, allowing them to fit snugly inside the "L" gap. Twist the cover until the housing

ledges are caught in the "L" gaps and will go no fur ther.

Return to the Reflector Lock on the back panel and turn the knob to the right "LOCK"

position. This will lock the cover / diffuser into place.

The ring reflector and the front cover / diffuser may be attached and / or removed at the

same time or separately. One need not be in place to attach or remove the other.

The front cover /diffuser additionally operates as a gel holder, having a raised lip

around the center where our doughnut-shaped gels / filters (sold separately as the

ABRW/DF6 Set of 6 Diffusion / Warming Gels) attach. Our six gels / filters each have

a pre-cut center hole for use specifically with the ABR800 ringflash and diffuser. The

diffuser must be in place in order to use the ringflash gels, but the gels may be used

with or without the ring reflector in place. Call us or visit us online to learn more

about our gels / filters!

Toll Free 1-800-443-5542 Please call us if you need any assistance!