A&L Furniture Lighthouse Istruzioni per il montaggio - Pagina 2

Sfoglia online o scarica il pdf Istruzioni per il montaggio per Luce per esterni A&L Furniture Lighthouse. A&L Furniture Lighthouse 2.

Stampa la pagina

PARTS

(included)

Body

STEP 1

Remove the four screws at the

ends of the shipping strips to

unfasten from the lighthouse

body. (See photo 1.) Pull the

head out of the lighthouse.

Remove the shipping strips

from the head & discard. (See

photo 2.)

STEP 2

Set the lighthouse body upright &

place the head on top, aligning

the predrilled holes inside the

head with the threaded inserts in

the top of the body. (See photo 3.)

Insert the 1½" bolts in the

predrilled holes inside the head.

(See photo 4.) Using the phillips

head screwdriver turn the bolts

into the threaded inserts & tight-

en.

STEP 3

Place the cap on top of the

head. (See photo 5.) Take the

lighthouse to the desired location

& pound in the 2 ground stakes

in the predrilled holes in the

base ring. (See photo 6.) If your

lighthouse included the optional

solar light kit, refer to the

operating instructions enclosed

with it.

Head

Cap

HARDWARE

(included)

1½" Bolts (2)

Ground Stakes (2)

Square Drive Bit (1)

TOOLS NEEDED

Screw gun

Phillips Head Screwdriver

Hammer

photo 1

photo 3

photo 5

photo 2

photo 4

photo 6