AlienTek T12 Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Pistola di saldatura AlienTek T12. AlienTek T12 16. Smart soldering station

ALIENTEK

5. Display description

After the power switch is turned on, the soldering station starts to display the boot UI. If there

is no access handle, prompt "No Tip", otherwise enter main UI and the soldering station works

normally. The working status of the soldering station can be divided into the following four types:

Normally: Heating and constant temperature at set temp.In the main UI, rotate or click the

encoder to enter temperature adjust UI. You can adjust the set temperature by rotating and clicking

the encoder. After the adjustment is completed, it will automatically return to the main UI.

Double-click the encoder to enter the setting menu UI, long press the encoder will return to the

main UI. When a period of time (Time①: Sleep Time) does not use the handle, does not rotate and

clicks the encoder, it goes to sleep.

Sleeping：Heating and constant temperature at sleep temp. Vibrate the handle, rotate or click

the encoder to exit the sleep state and return to the main UI. When a period of time (Time②:

Standby time) does not use the handle, does not rotate, and clicks the encoder, it enters the standby

state.

Standby：Not heated. Vibrate the handle, rotate or click the encoder to exit the standby state

and return to the main UI. The temperature of tip drops from the sleep temperature,when it drops

T100 Smart Soldering station

Fig 5.1 system flow

User Manual