Alienware AW3418HW Manuale di risoluzione dei problemi - Pagina 7

Sfoglia online o scarica il pdf Manuale di risoluzione dei problemi per Monitor Alienware AW3418HW. Alienware AW3418HW 14.

Each AW3418DW & AW3418HW monitor has a built-in diagnostic tool that helps you

determine if the screen abnormality you are experiencing is an inherent problem with your

monitor, or with your computer and video card.

To run the built-in diagnostics:

1. Ensure that the screen is clean (no dust particles on the surface of the screen).

2. Unplug the video cable(s) from the back of the computer or monitor. The monitor then

goes into the self-test mode.

3. Press and hold Button 3 for 5 seconds. A gray screen appears after 1 second. (Figure 9.)

Figure 9. - Accessing the monitor self-test using the OSD controls.

4. Carefully inspect the screen for abnormalities.

5. Press Button 3 again. The color of the screen changes to red.

6. Inspect the display for any abnormalities.

7. Repeat steps 5 and 6 to inspect the display in green, blue, black, and white screens.

8. The test is complete when the white screen appears. To exit, press Button 3 again.

If you do not detect any screen abnormalities upon using the built-in diagnostic tool, the monitor

is functioning properly. Check the video card and computer.

NOTE: You can run the built-in diagnostics only when the video cable is unplugged and the

monitor is in self-test mode

NOTE: For AW3418DW & AW3418HW, the gray screen will delay one second to appear.

NOTE: AW3418DW & AW3418HW will not show text pattern because they are G-sync model

Top of the Page

Assembling the Cable Cover

The AW3418DW & AW3418HW have a cable cover to assemble with the back cover of

monitor.

If you want to assemble cable cover, please slide the cable cover till it snaps into place. (Figure

10.)

NOTE: Note: Please check the 6 position of monitor back cover and cable cover