A&S Studio Bar 100 Manuale d'uso - Pagina 12
Sfoglia online o scarica il pdf Manuale d'uso per Sistema di altoparlanti A&S Studio Bar 100. A&S Studio Bar 100 14.
Stampa la paginaTo disconnect the Bluetooth function, you can:
-
Switch to another function on the unit.
-
Disable the Bluetooth function on your device. The device is successfully disconnected from the
unit after the "Disconnected" voice prompt.
-
Press and hold the " BF /PAIR" button on the remote control.
Tips:
•
Enter "0000" for the password if necessary.
•
If no other Bluetooth device pairs with this player in 2 minutes, the player will reconnect to the
previous connection.
•
The player will also be disconnected when your device is moved beyond the operational range.
•
If you want to reconnect your device to this player, place it within the operational range.
•
If the device is moved beyond the operational range, when it is brought back, please check if the
device is still connected to the player.
•
If the connection is lost, follow the instructions above to pair your device to the player again.
Listen to Music from Bluetooth Device
-
If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can
listen to the music stored on that device through the soundbar.
-
If the device also supports Audio Video Remote Control Profile (AVRCP), you can use the
soundbar's remote control to play music stored on the device.
1. Pair your device with the soundbar.
2. Play music via your device (if it supports A2DP).
3. Use supplied remote control to control play (if it supports AVRCP).
-
To pause/resume play, press the BF /PAIR button on the remote control.
-
To skip to a track, press the H , G buttons on the remote control.
Troubleshooting
To keep the warranty valid, never try to repair the system yourself. If you encounter problems when
using this unit, review the following before requesting service.
No power
•
Ensure that the AC cord is properly connected.
•
Ensure that there is power at the AC outlet.
•
Press standby button on the remote control or soundbar to turn the soundbar on.
No sound
•
Increase the volume. Press Volume Up on the remote control or on the right side of the soundbar.
•
Press MUTE on the remote control to ensure the soundbar is not muted.
•
Press source buttons to select a different input source.
•
When using either of the Digital input, if there is no audio:
- Try setting the TV output to PCM or
- Connect directly to your Blu-ray/other source, some TVs do not pass through digital audio.
•
Your TV may be set to variable audio output. Confirm that the audio output setting is set to FIXED
or STANDARD, not VARIABLE. Consult your TV's user manual for more detailed information.
•
If using Bluetooth, ensure that the volume on your source device is turned up and that the device
is not muted.
- 10 -