A'OK AC202-02 Manuale - Pagina 2
Sfoglia online o scarica il pdf Manuale per Ricevitore A'OK AC202-02. A'OK AC202-02 2.
Stampa la pagina
Function Adjustment
Remark:
①IR remote control must make program (same as RF operation), while within effective range.
②Receiver would come back the original state if there are not any operations within 10's.
③Only total 20 IR or RF transmitter can be programmed with 1 receiver
④The longest working time of motor is 5 minutes
4.Program setting（select delete channel before operation）
Power On receiver
press program button"sw4" once
5.Delete all codes on receiver
Power On receiver
Press program button"sw4"
for more than 4's
6.Delete single code on receiver（select delete channel before operation）
Power On receiver
press program button"sw4" once
7.Change direction
Power On receiver
press program button"sw4"once
8.Troubles handle
Items
When operate,the transmitter's LED1
work well ,and the receiver doesn't action
The transmitter's LED isn't bright or dark bright
The control system work well ,but the motor is out of working
4
Press up key,motor run down, press down key,motor run up
signal light flash
4's
signal light
flash quickly
and loose up
signal light flash quickly
signal light flash
signal light flash
Trouble
phenomenon
operate within 10's
to next step
Press the transmitter's
UP button
operate within 6's
to next step
press program button"sw4" once
operate within 10's
to next step
press down button once
operate within 10's
signal light
to next step
flash stop
press stop button once
Test/Solution/ probable cause
Have a check with the receiver's wiring
correct or not ,or the program setting is OK
Check the battery power is Ok or not
(The battery install is OK or not )
Checking the motor's wiring correct or not ,
and the motor had damage or not
set change direction on control or exchange the
up and down wire of motor
signal light
flash stop
Program finished
signal light
flash stop
All code deleted
signal light
flash stop
Single code deleted
Direction changed