AEG 24" BS7304001M Manuale d'uso - Pagina 16
Sfoglia online o scarica il pdf Manuale d'uso per Forno AEG 24" BS7304001M. AEG 24" BS7304001M 30. 24” built-in oven
Stampa la pagina
16
Clock functions
2. Touch
play shows
flashes in the display.
3. Use
TION.
4. Touch
5. Use
If you touch
of the END function.
6. When the set time ends, an acoustic signal operates for two minutes.
symbol and time setting flash in the display. The appliance deactivates.
Touch any sensor field or open the oven door to stop an acoustic signal.
7. Deactivate the appliance.
Setting the END
1. Activate the appliance and set an oven function and temperature.
2. Touch
flashes in the display.
3. Use
confirm.
4. When the set time ends, an acoustic signal operates for two minutes.
symbol and time setting flash in the display. The appliance deactivates.
5. Touch any sensor field or open the oven door to stop an acoustic signal.
6. Deactivate the appliance.
Setting the SET+GO
To start of the appliance with necessary settings with only one touch of the sensor field,
any time later.
1. Set an oven function (or programme) and temperature (refer to "Setting the oven
function" and "Changing the oven temperature").
2. Set DURATION (refer to "Setting the DURATION").
3. Touch
4. Touch
The display shows
5. Touch any sensor field (apart from ON/OFF) to start the SET+GO function.
You can use SET+GO function only if DURATION is set.
Check result (selected models only)
If you set END or DURATION function, 2 minutes before end of cooking an acoustic sig-
nal sounds and lamp activates. The appliance goes to the setting of the END or DURA-
again and again until the dis-
.
or
to set minutes for DURA-
to confirm
or
to set hours for DURATION.
or
during setting hours for DURATION, the appliance goes to setting
again and again until the display shows
or
to set END (first you set minutes and then hours) and
again and again until
to set the SET+GO function.
and
will flash in the display.
with a dot. This dot shows which clock function is activated.
.
or
to