AEG 944188495 Manuale d'uso - Pagina 34

Sfoglia online o scarica il pdf Manuale d'uso per Forno AEG 944188495. AEG 944188495 44.

TROUBLESHOOTING

Problems with Wi-Fi signal

Possible cause

New router installed or router configuration

changed.

The wireless network signal is weak.

The wireless signal is disrupted by a micro‐

wave appliance placed near the oven.

12.2 How to manage: Error codes

When the software error occurs, the display shows error message.

In this section, you will find the list of the problems that you can handle on your own.

Code and description

C2 - the Food sensor is in the oven cavity dur‐

ing Pyrolytic Cleaning.

C3 - the door is not fully closed during Pyrolyt‐

ic Cleaning.

F111 - Food sensor is not correctly inserted in‐

to the socket.

F601 - there is a problem with Wi-Fi signal.

F604 - the first connection to Wi-Fi failed.

F908 - the oven system cannot connect with

the control panel.

When one of these error messages continues to appear on the display, it means a faulty

subsystem may have been disabled. In such a case contact your dealer or an Authorized

Service Centre. If one of these errors occurs, the rest of the oven functions will continue to work

as usually.

34/44

Remedy

To configure oven and mobile device again, re‐

fer to "Before first use" chapter, Wireless con‐

nection.

Move router as close to the oven as possible.

Turn off the microwave appliance.

Remedy

Take out the Food sensor.

Close the door.

Fully plug Food sensor into the socket.

Check your network connection. Refer to "Be‐

fore first use" chapter, Wireless connection.

Turn the oven off and on and try again. Refer to

"Before first use" chapter, Wireless connection.

Turn the oven off and on.