Alinco DJ-196 Manuale di istruzioni - Pagina 13

Sfoglia online o scarica il pdf Manuale di istruzioni per Radio bidirezionale Alinco DJ-196. Alinco DJ-196 18. Vhf/uhf fm transceiver
Anche per Alinco DJ-196: Manuale di istruzioni (20 pagine)

Stampa la pagina

starts after the programmed WAIT time elapsed. The initial setting is 100ms.

【DTMF burst/Pause time】

1. When the DTMF code is transmitted using the auto dialer, the code is transmitted

with programmed burst/ pause time. The initial setting is 60ms.

【DTMF first digit's burst time】

2. When the DTMF code is transmitted using the auto dialer, the code will be

transmitted at the programmed first digit burst time. The initial setting is 60ms.

3. WAIT time cannot be changed while CH is displayed.

6-10 Alphanumeric Function

In the memory mode this function allows to display optional alphabet, number or code

instead of frequency.

【Alphanumeric function setting】

1. In memory mode select the desired channel.

2. Press and hold the F key, then press the D/NAME key while F icon is ON.

3. Flashing [A ] will appear on the LCD.

4. Rotate the dial to select the desired letter.

5. Press [Ｄ] key, the flashing will be stopped indicating the letter is stored.

6. The same letter flashes on the right of the stored letter waiting to be stored.

7. Press the [Ｄ] key to store in the memory.（Store desired letters in turn.）

8. If you press the C key while storing, the stored letters will be erased.

9. Press the PTT key to complete the operation.

【Operation of alphanumeric function】

1. When the unit enters the memory mode, if the channel is programmed

alphanumeric function, the frequency display part will be showed with the stored

alphanumeric letters.（The CH number will be displayed as it was.）

Press F key, and the frequency will appear for 5 seconds on the LCD.（If any key is

pressed within 5 seconds, the LCD returns to the display with the alphanumeric

letters.)

6-11 TOT (Time Out Timer) Function

【TOT setting】

1. Press and hold the F key, then press the 3/TOT key while F icon is ON.

[T-OFF] will appear on the LCD.

2. The display is toggled as follows by dialing, and the setting of TOT will be changed.

3. The number indicated on *** is the current Time Out Time.

4. Change the TOT time by rotating the dial. The TOT time can be programmed up to

max. 450 seconds.

......downward upward .....

..... OFF..... 30 .....60 .....90 ...............450.....

...........................................................

Press any key (except for FUNC and MINI keys) to complete the setting. The

LCD will return to the ordinal mode.

【Operation of TOT】

1. If the continuous transmission time is over the programmed time, a beep sounds 5

seconds before the time is up. Then the transceiver enters the receiving mode

automatically.

2. In this case, unless the PTT key is turned OFF, the next transmission is deactivate.