Garmin zumo 390LM Manuale d'uso - Pagina 11
Sfoglia online o scarica il pdf Manuale d'uso per GPS Garmin zumo 390LM. Garmin zumo 390LM 24. Declaration of conformity
Anche per Garmin zumo 390LM: Informazioni sul prodotto (36 pagine), Manuale di avvio rapido (4 pagine), (Francese) Dichiarazione di conformità (5 pagine)
Stampa la pagina
As you travel, the device guides you to the destination with
voice prompts, arrows on the map, and directions at the top of
the map. If you depart from the original route, the device
recalculates the route and provides new directions.
A data field displaying the current speed limit may appear as
you travel on major roadways.
Using the Navigation Map
1
From the main menu, select View Map.
2
If the zoom controls are hidden, select the map to display the
zoom controls.
3
Select the map.
4
Select an option:
• To zoom in or out, select
• To rotate the map view, select
• To switch between North Up and 3-D views, select
• To add or remove map layers, select
• To view specific categories, select
• To center the map on your current location, select
• To view shortcuts for map and navigation features, select
.
Adding a Point to a Route
Before you can add a point, you must be navigating a route.
1
From the map, select
2
Search for a location.
3
Select a location.
4
Select Go!.
5
Select Add to Active Route.
Skipping a Point in Your Route
If you decide not to go to the next point in your route, you can
skip the point. This prevents the device from attempting to route
you back to the missed point. This feature is not available if the
next point is your final destination.
From the map, select
Taking a Detour
While navigating a route, you can use detours to avoid
obstacles ahead of you, such as construction zones.
While navigating, select
Stopping the Route
From the map, select
Using Suggested Routes
Before you can use this feature, you must save at least one
location and enable the travel history feature
Using the myTrends™ feature, your device predicts your
destination based on your travel history, the day of the week,
and the time of day. After you have driven to a saved location
several times, the location may appear in the navigation bar on
the map, along with the estimated time of travel, and traffic
information.
Select the navigation bar to view a suggested route to the
location.
Navigation
or
.
.
.
.
> Where To?.
> Skip.
> Detour.
.
(page
16).
About Exit Services
While you navigate a route, you can find gas, food, lodging, and
restrooms near upcoming exits.
Services are listed under tabs by category.
Finding Exit Services
1
From the map, select
2
Use the arrows to select an upcoming exit.
3
Select an exit service tab.
4
Select a point of interest.
Navigating to an Exit
1
From the map, select
2
Select Go!.
Avoiding Road Features
1
Select Settings > Navigation > Avoidances.
.
2
Select the road features to avoid on your routes, and select
Save.
About Custom Avoidances
.
Custom avoidances allow you to avoid specific areas and
sections of road. You can enable and disable custom
avoidances as needed.
Avoiding an Area
1
Select Settings > Navigation > Custom Avoidances.
2
If necessary, select Add Avoidances.
3
Select Add Avoid Area.
4
Select the upper-left corner of the area to avoid, and select
Next.
5
Select the lower-right corner of the area to avoid, and select
Next.
The selected area is shaded on the map.
6
Select Done.
Avoiding a Road
1
Select Settings > Navigation > Custom Avoidances.
2
Select Add Avoid Road.
3
Select the starting point of the section of road to avoid, and
select Next.
4
Select the ending point of the road section, and select Next.
5
Select Done.
Disabling a Custom Avoidance
You can disable a custom avoidance without deleting it.
1
Select Settings > Navigation > Custom Avoidances.
2
Select an avoidance.
3
Select
> Disable.
Deleting Custom Avoidances
1
Select Settings > Navigation > Custom Avoidances.
2
Select an option:
• To delete all custom avoidances, select
• To delete one custom avoidance, select the avoidance,
and select
Gas
Food
Lodging
Restrooms
> Exit Services.
> Exit Services >
> Delete.
.
.
7