Garmin D2 AIRX10 Manuale d'uso - Pagina 33
Sfoglia online o scarica il pdf Manuale d'uso per Guarda Garmin D2 AIRX10. Garmin D2 AIRX10 48.
Stampa la pagina3 Select Navigate > Save Location.
TIP: To quickly mark a location, you can select
the controls menu
(Controls,
After the watch acquires GPS signals, the location
information appears.
4 Select
.
5 Select an icon.
Deleting a Location
1 Press
.
2 Select Navigate > Saved Locations.
3 Select a location.
4 Select Delete >
.
Navigating to a Saved Location
Before you can navigate to a saved location, your watch
must locate satellites.
1 Press
.
2 Select Navigate > Saved Locations.
3 Select a location, and select Go To.
4 Press
to start the activity timer.
5 Move forward.
The compass appears. The compass arrow points
toward the saved location.
TIP: For more accurate navigation, orient the top of the
screen toward the direction in which you are moving.
Navigating Back to Start
Before you can navigate back to start, you must locate
satellites, start the timer, and start your activity.
At any time during your activity, you can return to your
starting location. For example, if you are running in a new
city, and you are unsure how to get back to the trail head
or hotel, you can navigate back to your starting location.
This feature is not available for all activities.
1 Hold
.
2 Select Navigation > Back to Start.
The compass appears.
3 Move forward.
The compass arrow points toward your starting point.
TIP: For more accurate navigation, orient your watch
toward the direction in which you are navigating.
Stopping Navigation
• To stop navigation and continue your activity, hold
and select Stop Navigation.
• To stop navigation and save your activity, press
select
.
Compass
The watch has a 3-axis compass with automatic
calibration. The compass features and appearance
change depending on your activity, whether GPS is
enabled, and whether you are navigating to a destination.
History
from
page 7).
,
, and
Calibrating the Compass Manually
Calibrate the electronic compass outdoors. To improve
heading accuracy, do not stand near objects that influence
magnetic fields, such as vehicles, buildings, and overhead
power lines.
Your watch was already calibrated at the factory, and
the watch uses automatic calibration by default. If you
experience irregular compass behavior, for example, after
moving long distances or after extreme temperature
changes, you can manually calibrate the compass.
1 Hold
.
2 Select
> Sensors & Accessories > Compass > Start
Calibration.
3 Follow the on-screen instructions.
TIP: Move your wrist in a small figure eight motion until
a message appears.
Your watch stores up to 200 hours of activity data. You
can synchronize your data to view unlimited activities,
activity tracking data, and heart rate monitoring data on
your Garmin Connect account
App,
page 28)
(Using Garmin Connect on Your Computer,
page 28).
When the watch memory is full, your oldest data is
overwritten.
Using History
1 Hold
.
2 Select History.
3 Select an option:
• To view an activity from this week, select This
Week.
• To view an older activity, select Previous Weeks.
4 Select an activity.
5 Swipe up, and select an option:
• Select Laps to view additional information about
each lap.
• Select Sets to view additional information about
each set.
• Select Intervals to view additional information about
each swim interval.
• Select Time in Zone to view your time in each heart
rate zone.
• Select Delete to delete the selected activity.
Viewing Your Time in Each Heart Rate Zone
Before you can view heart rate zone data, you must
complete an activity with heart rate and save the activity.
NOTICE
History
(Using the Garmin Connect
27